How To Install Allure Vinyl Plank Flooring On Stairs: Steps To Install


Steps To Install Allure Vinyl Plank Flooring On Stairs

Follow the below-given steps in order to Install Allure Vinyl Plank Flooring On Stairs:
  1. Clean: The first step in the installation process is the cleaning of the stair. Use the purpose cleaner on the rag, sponge or paper towel and wipe down all the stair risers. Remove all the dust and dirt from the surface, in case of the peeling paint scrape that with the help of the scraper, at last Vacuum all the stairs so that the residue of paint and dust is removed.
  2. Heavyweight Paper: Now place the heavyweight large paper on the stair risers, then simply trace the shape and size of the stairs on the paper with the help of the pencil and accordingly cut the section, it is very important to label the section according to its stair because all of the stairs aren't of the same size.
  3. Vinyl Planks: Now place the large piece of the Vinyl on the work table or floor and lay the sections that were cut on it, then trace the section on it with the help of the grease pencil.
  4. Vinyl Knife: Now with the help of the vinyl knife cut the section that were traced.
  5. Peel: Peel off the backing protective cover, and carefully place it on the riser, begin at the edge exactly where the tread meets the riser. Continue the process for the rest of the stairs.
  6. Good Adhesion: In order to gain the good adhesion use the hard roller and roll over the area.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved