Step By Step Instructions Of Installing A Stairway Handrail
Stairway railings are regarded as the kind of railings that go along with the incline as well as the decline of the staircases. Handrails are only introduced to stair railings that go up and down through the stairs. Handrails are one of the most important pieces when it comes to home remodeling. In addition to decorative values, handrails are extremely important to build a safe environment for everyone living in the house. While installing a stairway handrail, you will get confused and think about which side of the staircases you should install the handrail. Its simple answer is that handrails should be frequently climbed on the open side of the stairs.
Tools & Materials Needed
- Miter Box, Level, Screwdriver & Stud Finder
- Tape Measure & Stainless Steel Clamps
- Miter Saw, Drill & Combination Square
- Awl, Chalk Line & Safety Glasses
- Wood Glue & Handrail
- Screws, L Brackets & Tape
Step 1: Measure And Mark Important Locations
First of all, it is important to confirm and verify the local building codes in order to get the height requirements of a handrail. Then, take the measurement and mark the wall at the base and top of the stairs. Bring the marks into contact with a chalk line. Track down the wall studs with the help of a stud finder and mark them through the chalk line. Using a level, you can mark the bracket locations in order to make sure that they are plumb.
Step 2: Mount The Brackets And Clamp The Rail
With the help of someone, you have to take hold of the railing in place at the perfect height along the chalk line, before positioning the bracket on the wall. With the help of an awl, punch the holes between the mounting holes of the brackets. Drill pilot holes as well as mount brackets on the wall. Clamp the long rail to the brackets before using a level in order to position the shorter piece.
Step 3: Cut The Rail Ends
Now, with the help of a combination square, mark the angles on both rails in order to make the cuts. Make a paper guidebook of the angles that are required to link two lengths of railing together and then mark the ends of the rails. Trim both pieces at the same time with the help of a handsaw in order to guarantee a match. Trim the upper as well as the lower ends of the rail with the help of a miter box so that you can get a 45-degree angle. Take the measurement and trim the pieces of railing that return to the wall in order to make sure that the items will not intercept and hold on the ends of the rail.
Step 4: Attach Returns And Rail
Finally, apply the glue on the ends of the rail as well as the returns. Secure returns and affix with the help of L-brackets and screws. Secure & fix the rail to brackets and fasten with screws. Apply glue on the uppermost part of the rail as well as the short rail before securing the short rail to wall brackets. With the help of tape, fix the joint in spite of the fact that the glue dries. Strengthen or support the joint with a metal plate below the railing.