Step By Step Process Of Installing A Recessed Medicine Cabinet
A recessed medicine cabinet is a kind of cabinet that has to be secured firmly inside the wall to rectangular framing. But you need to make sure that this framing is clear of all obstacle and roadblock. A medicine cabinet can help arrange systematically as well as streamline your morning rituals. If in case there are any wires or plumbing lines that are not easy to relocate, then it is better to install a surface-mount cabinet, instead of a recessed cabinet. It is strongly recommended to consult a professional if you are not having any knowledge or experience when it comes to the installation of recessed medicine cabinet. Installing a recessed medicine cabinet is an easy task provided you use the right tools & materials as well as follow the right technique. Collect the tools & materials required for the process first before going through the step by step process carefully:
Tools & Materials Needed
- Pencil & Level
- Utility Knife & Drill
- Keyhole Or Reciprocating Saw
- Wood Screws
- Wood Shims
- Tape Measure
Step 1: Cut The Hole
First of all, you have to cut the hole for your recessed cabinet, & to do so you need to center the cabinet above the sink at the suitable height and portray & draft a leveled outline of your cabinet on the wall.
Step 2: Score The Outline
The next step is to score the outline with the help of a utility knife as well as a level. After you have successfully scored the area, you need to cut out the area with the help of a keyhole or reciprocating saw and eliminate or pull out the drywall.
Step 3: Secure Horizontal 2 X 4 Blocking To The Vertical Wall Studs
Now, as soon as the space has been cleared of all obstacle and roadblock, you need to firmly attach or secure horizontal 2 x 4 blocking to the vertical wall studs with the help of wood screws in order to create the framing for your cabinet. Make sure the drywall is attached or affixed to the edge of the wall studs, before you insert screws as necessary.
Step 4: Remove The Medicine Cabinet Door
After that, you need to pull out the medicine cabinet door(s), set them to one side and move the medicine cabinet smoothly into place. Check the medicine cabinet in order to make sure that the cabinet is level. You can use shims, if necessary, to alter or move medicine cabinet slightly in order to achieve the desired fit, appearance, or result.
Step 5: Secure The Cabinet To The Wall
Finally, when you are fully satisfied that the cabinet is in the proper position, then you can secure it to the wall with the help of a provided mounting hardware (drill pilot holes for the screws if needed). As soon as your medicine cabinet is firmly attached in place, then you can complete your installation by attaching the cabinet door(s) back that you have removed in step 4.
Can You Put A Recessed Medicine Cabinet In A Load Bearing Wall?
Yes, you can easily install a medicine cabinet in a load-bearing wall & it is a doable job, however, if it is not done properly, then it could lead to a sagging floor/ceiling. As a result, there may be a need to call a pro. However, if your cabinet is small enough to fit betwixt two studs, then installing a recessed medicine cabinet in a load bearing wall should not be an issue.