How To Hide Wires Behind TV Stand: Best Ways For Hiding Wires

Best Ways For Hiding Wires Behind TV Stand

The main reason to hide TV or other wires in living room is that they look very ugly. However, there’s another important reason for concealing them and that is safety which is more important. All types of cords sometimes can be tripping hazards and they are potentially dangerous for small children in case they have access to them. But don't worry there are number of different ways for hiding them, which are mentioned below:

First Way: Cables Behind The Wall

If the user wants the TV wires to be completely invisible, then the best way is to run them behind the wall. To do this the user will need to cut down 2 holes in the drywall with the help of drywall saw, drill, or even with a utility knife. Drill the holes one behind the television and the other one near the outlet. In order to make sure that the spots user plan to drill are away from any wall studs, use a stud finder for this purpose and also make sure to keep the power off to the room. After that install wall-mounted cable plates on both the holes and pass the cords through the top of the plate into the lower plate. Incase the cords are on the shorter side, that time use the in-wall power and cable kit, which helps to add an outlet directly behind the TV.

Second Way: Hide Power Strip

The power strip is the main source of all the cord clutter, so lifting it up from the ground will surely help to keep all plugs out of sight. Most of the power strips have the holes on the backside so it can be mounted on the wall by using just a few screws or nails. Incase the entertainment center has legs, that time install the power strip just below the base so there will be no gap between the furniture and the wall.

Third Way: Use A Cable Catch

Before concealing or hiding the cords, please make sure they are secure. For that use a cable catch on the TV stand to prevent them from falling on the floor every time when a device is unpluged. The user can also use a cord hooks to run the wires down to the legs of TV stand, this will eliminate the dangling cords behind the stand.

Fourth Way: Bundle Cords Together

The other easy way of hiding the cables is by using cord wrap or dock, this will help to keep all the wires in one place behind the TV unit. Using a cord wrap or dock to organize the wires helps to keep them streamlined and very less cluttered.

Fifth Way: Cable Reel

It is an ingenious tool that allows the user to wind up the cords to conceal them or shorten them, and keep them untangled.