Step By Step Process Of Hanging Heavy Things On Aluminum Siding
Aluminum siding is regarded as a common and durable exterior home covering, which is usually very helpful when it comes to improving the overall appearance of the exterior home. However, it is a difficult task to hang objects, such as garden plaques on this material. Inserting nails or screws more often than not voids the warranty, which in turn causes moisture damage from rainfall. Instead, you can use a specially designed aluminum siding hook, that will help take hold of the object securely in place without damaging the aluminum siding itself. Entirely dependent on the brand, the majority of the vinyl or aluminum siding hooks will hold up to 12 lbs. of weight. If you are looking to hang heavy objects on aluminum siding, then carefully go through the below-mentioned step-by-step process and achieve the desired result of your work:
- Examine The Aluminum Siding To Determine The Place Of Hanging The Object
First of all, you need to check the aluminum siding in order to ascertain or establish where you are looking to hang the heavy object, not more than 12 lbs. In spite of the fact that you can adjust the hook, to a small degree, after installation, still you should try to get it as close to the final position as you possibly can. - Place The Aluminum Siding Under The Desired Siding Slat
After that, you need to pick up an aluminum siding hook and place it underneath the desired siding slat but make sure that the upper hooked portion is facing toward you. - Lay The Hook Flat Against The Siding & Pull Down Gently
Now, push the hook up underneath the siding, moving it from side to side if needed in order to accomplish this. Then lay the hook flat in opposition to the siding before pulling down gently in order to make sure that the hook is secure. - Hang The Object On The Aluminum Siding
Finally, pick up the object that you are going to hang on aluminum siding and find out the hanging hook on the back of it. Place or arrange the hanging hook in a straight line on the object with the lower hook on the aluminum siding hook before lowering the object into position.