Easy Procedure Of Hanging A Persian Rug On The Wall
It is not necessary for a Persian rug to stay on the floor. Persian rugs are usually designed very complicated or detailed and occasionally feature patterns or images that are, to a great degree, simple designs: they tell stories. With an exceptionally beautiful, appealing, or meaningful Persian rug, you can also create a wall hanging that accents your room as well as fits your decor. Hanging a Persian rug is extremely easy, and, if done accurately, can make the room where you are going to display it more attractive or interesting. If you don't want to purchase a costly and heavy frame in order to display your Persian rug, then you can easily make a sleeve and hang it yourself with the help of a rod.
Part 1: Making The Sleeve
- First of all, calculate the width of the rug so that you know how long the piece of fabric needs to be. Calculate around the rod in order to ascertain or establish the size of the fabric of the sleeve should be to fix over your rod size. The rod should move the sleeve smoothly and fit snugly.
- Now, trim the fabric as per the above-taken measurements in order to prepare the base for the sleeve. Make sure it lines up in opposition to the rug before you begin stitching.
- After that, stitch the fabric onto the backside of the rug through the edge you wish to hang atop. The sleeve will be through the side hanging from your rod, therefore, ensure you have decided how you want the rug to hang. It is best to sew the sleeve on every side of the entire perimeter of the fabric for strength as well as durability.
- Finally, trim the rod to the measurement or extent of the rug from end to end. Make it long enough in order to stick out a few inches on any side of the rug so that it can fit in the brackets.
Part 2: Hanging A Persian Rug
- Firstly, calculate the length of your rug as well as the height of your wall. If the rug is much shorter as compared to the wall, then attempt to find a spot that is approximately in the vertical middle of the wall.
- Discover the exact place or position of the two studs in order to install your brackets in. The studs offer support for the wall and are much stronger in comparison to the majority of the wall materials. This takes hold of your Persian rug securely without damaging your wall.
- Now, make a hole using a drill & insert screws into the wall before installing your brackets. You can keep it simple or purchase ornate brackets and hardware in order to accent the rug.
- Hang the rod on your brackets without the rug to test them. With the help of a level, see if your rod hangs flat & uniform. Alter or move your brackets slightly in order to achieve the desired fit, appearance, or result, if they are not level. Move the rod smoothly into your newly-sewn sleeve and hang it on the wall.