How To Hang A Cabinet: Easy Steps To Hang


The hanging cabinets are having numerous benefits and some among them are defined as follows:
  • Storage Abundance: Instead of having the large and unused wall the users can now easily install the hang cabinets there where they can store almost every kitchen item like utensils and other kitchen gadgets.
  • Clean Kitchen Area: The hang cabinets usually do not contain the open areas and that is why the dust and debris particles do not get accumulated their so easily.

Easy Steps To Hang The Cabinet

The users can easily hang the cabinets by following the below-mentioned steps:
  • Planning: The users need to start by planning about their space and they need a standard plan to plot out where they exactly want installation of their cabinets.
  • Examine: The users need to examine whether their floor is leveled or not and if they find out that their floor is not leveled then they need to start measuring the floor from its highest point and then mark down the 54 inches that are near about 137 cm from that highest point to the floor.
  • Draw: Then they need to draw the horizontal line from that pointed area and in order to get a perfect horizontal line the users need to Use the level.
  • Locate Wall Studs: Once the users have made the horizontal line then they need to locate the wall studs by using the stud finder and once they found all the studs they need to mark down their location along with the horizontal line respectively.
  • Ledger Board: The users then need to affix the ledger board as per that horizontal line by affixing it down at the stud location by using the sharp screws. The ledger board offers immense support to the cabinets while they are installed.
  • Detach The Doors: Then they need to detach the doors from cabinets by unbinding the metal hardware like knobs, hinges. By detaching the doors the users can easily hang the cabinets to the wall.
  • Adjoin: Then they need to adjoin as many as cabinets they can and to complete this step the users need to use the clamps. The clamps can easily affix the sides of the cabinets altogether.
  • Drill The Screws: Once the cabinets are clamped together then the users need to drill the screws on the top and on the bottom of the cabinets.
  • Pull Up: The users then need to pull up the cabinets and allow them to rest on the pre-drilled ledger board. The users are advised to make sure that the cabinets are on a straight level.
  • Affix: Then affix the cabinets by drilling the screws to the studs and then similarly affix the rest of the cabinet pieces by following the same process.
  • Detach Ledger Board: Once the cabinets are perfectly drilled on the wall then the users need to detach the ledger board and then re-attach the doors by using the pre-existing metal hardware accordingly.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved