Steps To Glaze Furniture With Stains For Antiquing
The steps on how to glaze the furniture With stain for Antiquing are given below:
- Distress: Begin with distressing the area with fine sandpaper that is to be glazed. Remove any hardware and rub in a way that will make the surface smooth and then wipe away sawdust. After that clean the wood with detergent and allow to dry for at least 24 hours.
- Apply Base coat: In case the user is glazing the unfinished piece or covering an old finish then a base coat of gloss or flat enamel, if necessary apply the second coat allow to dry completely.
- Glaze Mixture: After that Dip a clean brush into the glaze mixture. Begin with the Lightly brush glaze into depressions and grooves and then onto flat surfaces. Only work one area at a time because the glaze dries very quickly.
- Excess Glaze: In order to remove the excess glaze use a clean lint-free rag like paper towel type rags, if the user ends up with more glaze then lighten up the area with a baby wipes, the wipes made the job easier because it would wipe away even slightly dried on glaze.
- Textured Glazing: In order to give a piece a bolder look or different designs that can be done with the texturing the glaze. Texturing can be done with cheesecloth, plastic wrap crumpled newspaper, and a sponge.
- Protecting The Surface: For the more durability it is better to seal the furniture with a semigloss or high-gloss varnish. However, the varnish should be compatible with the antiqued finish, apply the varnish directly.
Steps To Glaze Furniture With Acrylic Paint
It is very simple to glaze furniture with the Acrylic Paint, the steps are mentioned below:
- Paint: First of all Paint a semigloss surface, allow to dry.
- Apply The Glaze: Now Mix glaze to the right amount and consistency.
- Small Areas: It is always better to Work in small sections.