Step By Step Easy Process To Remove Dry Erase Marker From Microfiber Couch
Microfiber is put together & manufactured from very fine, soft strands of polyester as well as a synthetic material. It is a material that is considered a popular choice when it comes to upholstery and furniture, & its appearance is much like suede or leather. Microfiber is regarded as extremely long-lasting, repelling water and the majority of stains easily. However, dry erase markers can even now leave their mark: The ink accommodates and holds both release agents as well as pigments. Although the release agents prevent the marker from adhering or clinging to dry erase boards as well as other non-porous materials, when it comes in contact with carpet, clothing, or upholstery including your microfiber couch, the color becomes trapped. However, a few household ingredients will get rid of the ink and leave your couch looking as good as new again.
- Product Label: First of all, go through the product label when it comes to care instructions. Locate the care code on the product label: "W" strongly suggest water-based cleaning solutions are safe, while "S" specifies use only solvent-based cleaners. "S-W" indicates that either solvents or water are OK, and "X" points out that your couch should only be vacuumed. If you detect an "X," then consult a professional for best results; using any product could effectively ruin the microfiber, so begin a course of action with utmost care.
- Test Rubbing Alcohol: Look for a hidden area on your microfiber couch so that you can test rubbing alcohol on the material. For example, find a spot underneath the seat cushions, on the back, or on the skirt. Rubbing alcohol is safe for the majority of the microfiber material, however, when inadequately applied it might leave a ring.
- Cotton Swab Or Cotton Ball: Now, make a cotton swab or cotton ball slightly damp or just barely wet with rubbing alcohol, ideally a 99-percent strength version, due to the reason that it dries faster. Use a lesser strength, as another option or possibility, or even a clear liquor like vodka; the alcohol is the active ingredient that will get rid of the dry erase marker ink, so both will work.
- Use Alcohol: Rub smoothly with the alcohol in your test location. Repeat several times as if you were getting rid of the ink. Apply an adequate amount of alcohol to find out that the alcohol is not spreading too far as you rub and that the alcohol does not stain the microfiber or leave a ring when it dries. After testing, wait an hour or two to look at your results. If there is no stain, then begin a course of action to use the alcohol in order to get rid of the marker stain.
- Use Cotton Balls: Shift or change to a soft cloth or use cotton balls, regardless of what works best for you is entirely dependent on the size as well as the degree of the dry erase marker damage. Moisten with the alcohol.
- Blot The Stain: Soak up the stain, using little to no pressure in order to ensure that you are not actually pushing the stain into the microfiber. Use a circular motion and smooth contact to "scrub" areas that resist removal, depending on repetition rather than force. Switch to a clean cloth or cotton ball as needed. Clean small areas at a time if in case the marker damage is substantial.
- Dry Your Microfiber: Allow your microfiber to dry in a thorough manner, it may be difficult to really make sure that the stain is removed as long as it is dry, and the wetness may make you think it is still damaged. With the help of a hairdryer, dry your couch quickly, particularly, if you used low-strength rubbing alcohol; this helps stop moisture damage rings and splotches. Set the dryer on "low" and take hold of it nearly 8 to 10 inches away from your couch. Be extra careful to prevent heat damage.
- Rub The Fabric: Finally, with the help of a toothbrush or other soft-bristled brush, rub the fabric, as soon as it is dry. Rub smoothly & firmly without pressure. This will restore the softness as well as the natural texture of the fabric.