Step By Step Process Of Removing Air Bubbles From A Wallpaper
Applying a wallpaper in any room of your home will make it look beautiful as well attractive & give a room some design. However, with a newly installed wallpaper comes the formation of pesky wallpaper bubbles. Bubbles in wallpaper usually start with wallpaper installation, particularly when wallpaper fails to accurately affix or bind with the wall surface. It can happen immediately after installing the wallpaper or over time. Another reason for air bubbles to occur on your wallpaper is not permitting the wallpaper panels to “book”. To book, paste must be applied onto the wallpaper panels, which in turn allows it to absorb the adhesive and expand. If the “booking” time is not enough, then the wall covering will expand on the wall, which as a result leads to the creation of air bubbles. Air bubbles in wallpaper may also point out or specify a fault, blemish, or undesirable feature in the wall surface, such as dirt, paint chips, or holes. Making sure that you have a clean as well as smooth wall surface and permitting adequate “booking” time for wallpaper panels, you can stop bubbling wallpaper from occurring.
Thing's You Will Need
- Razor Blade Or X-Acto Knife
- Sponge
- Tweezers
- Wallpaper Paste
- Small Specialty Syringe
Easy Step By Step Process
- Cut The Bubble: First of all, with the help of a razor blade or X-Acto knife, you need to make a small incision in the wallpaper bubble.
- Push Out Air And Remove Any Solid Material: Now, smoothly press down on the bubble in order to get all the air out from beneath it. Use the tweezers in order to rigorously open up the incision before getting rid of any problem material, such as dirt or paint chips from inside the wallpaper bubble.
- Use The Syringe To Apply Adhesive: Next, load a syringe with wallpaper glue before inserting it into the incision. Apply a sufficient amount of glue, but be extra careful not to oversaturate the area. If you have just hung the wallpaper, it is important to press down on the bubble & then apply more glue. If it does not hold, then you can use the syringe in order to add more.
- Smooth Out The Bubble: Finally, flatten the paper in opposition to the wall using light pressure. Smooth out the bubble with the help of a damp sponge. Wipe off any excess glue before allowing the wallpaper repair to dry. Repeat the same process on other wallpaper bubbles, as needed. As soon as you are done, you can sit back & relax as you have successfully removed air bubbles from a wallpaper.