How To Fix Water Damaged Wood Table: Steps To Repair Swollen Water Damaged Wood Table Top



How To Fix/Repair Water Damaged Wood Table Top?

  1. Furniture Cleaner: Try to remove the stain with the help of the cleaner, mix few drops of the orange oil to the cleaner and rub on the affected area in the circular motion with the help of the soft cotton cloth, repeat the process until the stain is removed.
  2. Sand: If the stains are tough than use an electric sander to sand the area, use 220-grit sandpaper, sand in the direction of the wood grains, once the sanding is completed then remove the dust with paintbrush.
  3. Strip: Now use the chemical stripping agent to strip the affected area. It is one of the easiest ways to remove deep-set stains without affecting the layers of wood.
  4. Scraping Tool: Once the stripping is done then use scraping tool like a putty knife and scrape the surface. In order to remove the excess stripping agent Sand the area and again remove the dust with a paintbrush.
  5. Stain Or Paint: The best option is to use the water-proof Stain or paint, apply in the even coats.
  6. Varnish: Once the paint or stain is completely dried, apply the two coat of the varnish, let the first coat dry then apply the second one.


How To Fix Water Damaged Swollen Wood Furniture?

The steps to fix the water damaged swollen wood furniture are mentioned below:
  1. Protective Glass: Put a protective glass and mask, that will secure the eyes from the dust or being inhaled into the lungs.
  2. Sanding: Now start the sanding process with 220-grit sandpaper, sand until the damaged area becomes smooth and even. Several sanding disks will be required to completely sand down the table.
  3. Bleach With Water: In case the table is not perfectly even then make a solution of the bleach with water in a bucket. Then scrub the entire table with the solution but focus on the damaged area.
  4. Dry: Allow the table to dry and then Sand the surface again to get a smooth, even finish.
  5. Furniture Oil: Now apply the furniture oil, simply rub the oil on the surface with the help of the rag, apply the coat until the desired color is achieved, Allow the oil to dry.
  6. Polish: Use the best quality furniture polish to clean and buff the table, but perform this step on the next day.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved