Steps To Repair Loose Chair Legs
Here are some of the steps by which the customers can easily repair the loose chair legs:
- Examine The Joints: The customers need to start by examining each joint of the chair and then find out all the loose joints accordingly. The customers need to fix all the joints exactly at one time. The customers then need to disconnect each joint from the chair in order to make those joints available for the cleaning purpose.
- Clean The Old Glue: The customers then need to Clean all the previous glue from the edges of the chair legs or the stretchers and even from the inside area of holes by using the knife, scraper or the chisel as well. The customers necessarily need to remove the old glue unless the new glue won't stick to it.
- Apply The New Glue: The customers then need to apply the new glue to edges of the legs, stretchers and even to the inside area of the hole accordingly.
- Put Back The Chair Parts: The customers then need to Put back the chair parts together by using the mallet or the clamp if required.
- Drill A Small Hole: The customers then need to grasp the loose joint of the chair tightly together and then they need to drill a small hole beneath the underside area of the chair at the same angle of the joint on the chair.
- Place The Screw: The customers then need to place the screw in the drilled hole accordingly. The drilled screw holds together the joint till the time the wood glue completely dries. This step will prevent the chair joints from unbinding again.