5 Easy Steps & Items Needed Of Fixing A Gap Between The Window And Frame
The draughts that are present within the house are the topmost reason that makes the room uncomfortable and cold as well. It can make a big difference if the users seal up the gaps within the frame of the window. In this manner, the users can easily increase comfort but this is the cost-effective way by which they can easily trim down the cost of the energy. The users can easily fix the gap between the windows and frame at home by gathering the below-mentioned materials and then following the below-defined steps carefully:
Materials Required
- Cleaning Cloth
- Caulk Gun
- Caulk
Step 1: Examine The Leaks
First of all, the users need to light down the candle near the surface of the window and to the outer doors where they suspect of having the air leaks. If in case the users find out that the flame is dancing around, then they will get to know that there is a chance of the air-flow and the users are having the leak.
Step 2: Clean The Area
In order to secure the complete adhesion, the users need to detach the pre-existing caulk and the paint as well. The users need to be assured that their area is not having the dust or the debris particles or does not have the loose flakes of the paint as well.
Step 3: Prepare The Caulk Gun
After that, the users need to trim the seal of the caulk by using the sharp knife or the secateurs. They need to trim the nozzle at the forty-five-degree angle with the opening which is near about the hole size that needs to be filled. Then they need to adjust the nozzle to the cartridge top and then place it within the gun by simply lifting the canister base within the gun.
Step 4: Caulk The Leaks
Then the users require to apply the firm pressure on the trigger of the gun so as to force down the filler within that area from where the leak occurs. Then move down the nozzle on the joint by applying the gentle action. Then wipe down the unneeded caulk material with the spoon, spatula, or the finger soaked in the mixture of the soap and the water.
Step 5: Finish Up The Process
Finally, wipe down the unneeded sealant by using the wet cloth quickly and then allow it to get dried off completely for near about half an hour before painting it down.