How To Fix Floating Shelves Without Brackets: Step By Step Process Of Fixing Floating Shelves


Step By Step Process Of Fixing Floating Shelves Without Brackets

The shelves without the brackets are normally called the floating or bracketless shelves, these types of shelves also have a seamless & clean presence, seeming to float on your wall very easily without any means of support. The hanging floating or bracketless shelves can seem intricate, but the process is also straightforward. The floating shelves in fact will use supports but they are also fastened to your wall and then hidden inside your shelf. If you want to fix floating shelves without brackets then you have to collect some required items and follow the step by step process:

Step 1: Tools And Materials

When you are going to install a floating shelf then you will need a stud finder, level, measuring tape, drill, screwdriver, and pencil, because these materials will provide the hidden support for your shelves, such as the ledges, dowels, pins or any other hidden brackets. You need to use screws that are at least three inches long to install the supports so that you can make sure that the screws reach & grip the stud behind your wall.

Step 2: Preparation

You need to plan for the location of each shelf before you begin your installing process of wall anchors and the plugs. Just make note of the measurements of your shelves and how they will be placed on your wall. You just need to use a stud finder and then mark the location of your wall studs with the help of a pencil and then you need to set a level on your wall, use it to mark straight guidance for each shelf.

Step 3: Supports And Installation

You now need to use your floating shelf kit for the simplest way in order to install the shelving without using the brackets, these kits contain all the required hardware and instruction guidance for hanging your shelves. The floating shelf kits commonly use hidden brackets for support. The brackets of metal are sunk into your wall at each stud, & the section that protrudes from the wall fits into the shelf itself. Use a kit that is labeled to support more than the weight of your items which you plan to place on it. You can easily mount your shelves by using support pins or ledges. A support pin will also function the same way as an invisible bracket does in your floating shelf kit. It also resembles a long rod with a flanged end & also fits into your shelf from behind. The flanged end is fastened to your wall studs. The ledge bracket is a type of angled piece of metal that needs to be installed into the groove on the back of your shelf. This will also provide you the sturdy support all the way across your board, instead than at separate points. The portion of your ledge that sticks out of your shelf is secured to your wall studs.

Step 4: Anchors

The right wall anchor is very demanding for the proper installation of the floating shelves. The wall anchors are also subjected to gravity, which will pull down & the weight of objects, which will pull outward. Each type of anchor is rated for a definitive amount of weight, the good rule is to speculate the anchors will hold about a quarter of the stated load. This way you can make sure that your shelves won’t fall. The medium-to-heavy hollow wall anchor will also work well for the most shelving applications. The toggle bolts are also very best when you try to hang heavier shelving materials or shelves that will hold heavier items.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2020 GetRit.Com   All Rights Reserved