Drywall is considered a common material when it comes to interior walls as well as ceilings in buildings and homes. In spite of the fact that you can protect the material using a variety of textures as well as finishes, it is still vulnerable & prone to dings, dents, scratches, and even peeling tape that covers the joints. Only painting over an inappropriately-patched blemish will not solve the problem, due to the fact that the patch is usually still fairly obvious. A better option is to fix the blemish in order to make sure that it blends with the wall texture adjoining the area to be patched.
Fixing Drywall Patch Marks Showing Through Paint
The difference in texture betwixt the patched areas as well as the non-patched areas is accountable when it comes to drywall patches showing through your paint job. The patched areas usually appear smoother in comparison to the rest of the wall. This may not be noticeable or perceptible from all angles, however, under the right lighting conditions, the patches will be extremely noticeable like a sore thumb. Drywall as well as all drywall patches must be primed when it comes to making sure that the final paint adheres to the surface properly. Drywall patches without primer soak up the paint, which in turn makes it appear flattered. This will help the drywall patches to stand out even more.
Thing's You Will Need
- Putty Knife & Hammer
- 10-Inch Drywall Knife
- Drywall Compound
- Drywall Sanding Pad
- Paint Roller And Pan
- Primer & Paint
Step 1: Scrape Away Any Loose Particles
Firstly, remove any loose or raised particles, which may include loose seam tape, from the patched area, with the help of a putty knife. Tap the area gently & softly with the help of a flat-faced hammer in order to create a slight indention as well as loosen any remaining particles.
Step 2: Apply A Thin Coat Of Drywall Compound
Now, apply a thin coat of drywall compound to the area with the help of a drywall knife. If the area that you are looking to patch is a seam, then it is important to apply a fresh piece of drywall tape over the compound on the seam, before applying another thin layer of compound over the tape. Allow the compound to dry wholly.
Step 3: Sand The Patched Area
Smoothly & firmly sand the patched area with the help of a drywall sanding pad in order to lower any slightly raised areas. Then, get rid of any dust from the patch before applying a second thin layer of drywall compound, making sure to work outward a few inches from the outermost part of the first layer. Allow this layer to dry rigorously, then repeat, working out a few inches in consecutive layers as long as you have completely feathered the patch and cannot see or feel any blemish.
Step 4: Apply A Coat Of Primer
Finally, wipe down the wall before applying a coat of primer to the patched area and nearly a foot into the painted wall with the help of a medium nap roller. As soon as the primer has dried rigorously, apply two more coats of finished paint from the same paint that was used to paint the wall originally.