4 Easy Steps & Items Needed For Fixing Dents In A Stair Riser
Stairs are considered as the busiest area in your homes that it is very much possible that the stair risers take some serious wear and tear. Dents, as well as gouges on risers, occur frequently, but they do minimize the beauty of a wooden staircase. It is extremely important to know about the quick repairing process in order to keep your staircase looking neat & clean. If in case dents and gouges are minimal, then filling them may be an easy & quick process rather than refacing the risers altogether. in order to fix dents in stair risers, it is important to gather the required items first before going through some simple steps carefully:
Items Needed
- Fine Grit Sandpaper
- Wet Cloth & Iron
- Wood Putty
- Putty Knife
- Wood Stain
Steps
- Firstly, you have to perform the sanding process, so start by sanding the dented portion unless & until the finish is completely eliminated. Make sure to always run the sandpaper in a similar direction as the wood grain.
- Now, take a wet cloth & apply it to the dent, then smoothly move a hot iron over the cloth for numerous times. This may make the wood expand enough in order to fill the dent. Give the wood some time to get dried off completely.
- If in case you feel that the dent is still visible, then you have to fill it with the help of a wood putty that resembles the color of the existing wood. Now spread the putty with the help of a putty knife and then use the knife in order to brush it smooth. Make the putty dry entirely as per the manufacturer's directions.
- Finally, perform the sanding process on the filled area delicately but make sure to sand in the direction of the wood grain. After that, stain it in order to make it resemble with the existing wood.
Useful Tip
If in case your stair risers are protected with polyurethane, then you can use mineral spirits and a scouring pad rather than sandpaper in order to eliminate the finish.