How To Fix Cracked Marble Countertop: Ultimate & Easy Methods

Ultimate & Easy Methods For Repairing The Cracked Marble Countertop

There are a number of ways to repair the marble countertops, this usually depends on the type of damage or the crack to the marble. While some of the damage like water stains are very easy to repair, other damages, however, require some more specific efforts. Some of the easy methods are mentioned below:

Method 1: Waxing

In this method the user has to do regular waxing that will restore all the shine of the marble. This will also help to create a protective barrier right on the surface of the marble countertop which in turn helps to prevent the additional damage from the scratches or water.

Method 2: Varnishing

Cover-up all the surface of the marble with a coat of the polyurethane varnish. Same as waxing, applying the polyurethane will help in creating a protective barrier for the surface of the countertop. This will also restore the shine to the marble countertop.

Method 3: Epoxy

Basic preparation work is required before applying the epoxy to the cracked marble countertop. Simply clean all the cracked areas by rubbing it with the help of a nylon-bristled brush as this will remove all the loose marble particles. If in case, there are a lot of the particles, then catch them all on the newspaper and store them for the epoxy. Wipe down with the acetone along all the crack to clean the area as this will make it much more receptive to epoxy. Then apply a very thin layer of the epoxy and carefully re-apply the chip or damaged piece of the marble. Wipe away the excess epoxy if there is any. Leave the adhesive to dry and after that wax the area or simply apply polyurethane varnish.

Method 4: Marble Powder

The marble powder from the same type of marble will help to mask the repair. This powder is usually available from shops that sell the marble monuments. Mix the equal parts of the marble powder and the epoxy or any adhesive in a container, then brush the prepared mixture on the crack with a small brush in a thin layer, allow the mixture to seep in the depths of the crack. Once it is dry, then sand the area all along the direction of the cracked area with very fine sandpaper.

Method 5: Tin Oxide

Use the tin dioxide to repair all the scratches as well as the stains to the surface of the marble. It can be purchased from the monument stores or from the building supply retailers. The tin dioxide is also known as the grade polishing powder. Apply the powder on the affected area using a piece of felt fabric. Simply rub it on the surface of the marble until the crack or stain is fully removed.