Step By Step Process Of Removing Bubbles From Vinyl Sticker Or Decal
It is highly possible that your vinyl decal gets affected by bubbles which can be a deformity. Fortunately, you can easily smooth out the bubbles from the vinyl wall decal or sticker. The majority of the people apply vinyl decals, including racing stripes and flames, on cars and use them for home decor, collection, as well as laptop decorations. The decals have one adhesive side that is pressed in opposition to a flat surface. A squeegee is then used when it comes to pressing out the bubbles. The problem, however, is that some bubbles can get stuck underneath the decal. Therefore, you need to work out the bubbles by hand. It takes a steady hand as well as a proper understanding when it comes to installing these decals in order to make sure that you minimize or completely remove or get rid of any bubbling that may occur before the decal sets. Go through the below-mentioned step by step process carefully in order to get rid of bubbles from the vinyl sticker:
- Apply Vinyl Decal On A Clean Surface
First of all, put or spread the vinyl decal on a clean surface. Prep the surface by spraying with glass cleaner and then wipe using a soft cloth. Organize or plan the vinyl decal on the surface having the backing still attached or secured. Tape the top of the decal with the help of a masking tape to the surface you are applying it to. - Flip Up The Decal & Peel Off The Backing
Overturn the decal before peeling off the backing in order to reveal the adhesive. Gradually pull the backing paper at a sharp angle, beginning at the upper-right corner to expose the decal. Carefully, turn the decal over and lay it on the surface. Take a squeegee or something having a hard edge and run it over the decal. - Find Out The Air Bubbles In A Decal
Look at the decal in order to locate air bubbles. Take a straight pin or the tip of a razor blade in order to poke a hole into the bubble. Work out the bubbles by holding them down toward the edge. Holes in the decal will be unseen & invisible after the bubbles are worked out. - Use A Hairdryer To Remove Stubborn Bubbles
Use a hairdryer when it comes to removing firm & adamant bubbles, due to the reason that heating the decal will soften the adhesive. Plugin the hairdryer & point the hairdryer at the decal and heat the decal for at least one minute. Hold the bubbles down toward the edges of the decal in order to deflate them.