A bifold closet door has a very modern and chic appearance. It is a wonderful option when it comes to usability as well as appearance. A large closet with bifold doors makes it easier for you to access the shelves and divisions. It has two or more doors that are hinged together. When folded, they are 90 degrees apart from one another. The top and bottom of the bifold closet are pivot points. Now, if you notice that door swaying or pulling away from the track, the pivots probably aren't working properly. You must fix the door in order for it to work properly once more. If you know how, fixing the bottom pivot of a bifold closet is not that difficult.
4 Easy Steps To Fix A Bifold Closet Door Bottom Pivot
It frequently happens for the bracket to break or for the bottom pivot to come off. These pivots risk damage because they are used to move the entire bifold door. But if you know how to correct them, it's not that tough. In fact, if you notice a problem with the bifold door, you can fix it on your own. The quick step by step fixes for a bifold closet door bottom pivot are listed below:
Step 1: Remove The Door From The Trail
To make things go more easily, you must first take the door out of the trail. If the pivots and screws are secured, you cannot work on the door. Because of this, you must get rid of it. You must exert force on the upper spring pivot in order to remove the door. The bottom of the door is released from the bottom bracket as the spring compresses the upper pivot. To completely separate the door from the upper trail, move it in your direction. Before you begin working on it, position the door to the side.
Step 2: Unscrew The Old Bottom Pivot
Replace the bottom pivot if you notice one that is broken. To replace, you must take out the old bracket and make room for the new one to be installed. With a screwdriver or drill, first remove the screws holding the bottom bracket together. The bracket will come off the door as the screws are taken out. Therefore, the door's connection to the floor and walls is maintained by this bracket. One side of the bracket is bent to face the floor, and the other side is bent to face the wall. There are holes for the screws on the side that faces the floor. Two screw holes can be seen on the opposite side. Detach the bottom pivot and take them all off.
Step 3: Screw A New Bottom Pivot
A fresh bottom pivot bracket is required. The bracket must be adjusted in the same location as the previous bracket. The previously constructed holes would be along which the screws would be positioned. In actuality, the holes would help you find the bracket's location. In general, 34 inch screws are needed in the holes that face the wall and 2 inch screws are needed in the holes that face the floor. To fasten the new bottom bracket to the door, drill or screwdriver these screws into the holes.
Step 4: Position And Align The Door
The bottom bracket can now be reattached to the trail after being secured to the door. The door must be put in place just as you did when you removed it from the higher track. Press the door upward while the spring is in the top pivot bracket to cause the lower pin to fall into the lower pivot bracket on its own. Both pins are now inserted into the brackets. Ensure that the upper and lower brackets are on the same line. To determine whether the positioning is correct or incorrect, try folding the door. If it isn't smooth, you can slide the door by slightly loosening the pivot. Place the pivot there and tighten the screws where you feel the door is moving smoothly.
You Can Watch YouTube Video About Fixing Bifold Door Bottom Pivot Here