How To Fix An Office Chair That Won't Go Up: Step By Step Process Of Fixing Office Chair That Won't Go Up

You will usually spend a minimum of eight hours sitting on a chair working in an office and it has been researched that nearly 50% of the people suffer back pain, due to the fact that you are working with the wrong chair height. If you sit on an office chair with wrong posture, it will definitely have an adverse effect on your spine. In order to avoid this issue, you need to adjust the chair height until you feel comfortable sitting on it. However, you can come across the situation where your office chair won't stay up or you are not able to raise your chair and adjust it according to your comfort. If you are worried about the fact that your chair won't stay up, then this could be probably due to a gas loss issue. In most of the cases, it is possible that chair lose gas and then refuse to stay up. If you are experiencing this problem, you may have to face many consequences. For instance, if you use the chair without raising and adjusting it as per your comfort, then you may feel tension on your neck. It is important to prioritize your health, therefore, if you have a chair that won't stay up, then you need to solve this problem as soon as possible.

Step By Step Process Of Fixing An Office Chair That Won't Go Up

The office chair usually comes with a pneumatic cylinder that will help you when it comes to raising or sinking the chair. There is a pressurized air inside the pneumatic cylinder that will help move the piston, which in turn, allows the chair to be adjusted according to your comfort. You can use air pressure as a support system and pneumatic cylinder creates a suspension that will help you adjust the seat height. One of the important components of the pneumatic support system is a control valve that will help increase or decrease the height and supports your weight.

Step 1: Use A Hose Clamp

Using hose clamp is regarded as the most useful way when it comes to fixing an office chair that won't go up. It is an easy & cheap way that you can perform yourself at your home without needing to completely disassemble the chair. PVC pipe is another possible way that you can use but hose clamp is prioritized by almost everyone. In order to use hose clamp, you, first of all, need to take the cylinder before sliding off the plastic skin from your chair. The majority of the office chair parts consist of a visible plastic skin that usually helps in covering a metal tube. You need to expose the tube in order to successfully fix the sitting spot. So, it is important to slide off the plastic skin.

Step 2: Adjust The Chair To The Comfortable Height

Adjusting the chair as per your comfort is the most important step as you can't change it later. As soon as the metal tube is exposed, you need to adjust the seat as long as you feel comfortable with the chair height. In order to known the perfect chair height, the best option is to use your knees as a reference. When you stand up, you need to make sure that the seat is level with them. On some occasions, your office chair is so damaged that it doesn't stay up even if no one is sitting on it. If that happens, you need to lay it on its side in order to complete the process.

Step 3: Grab The Cylinder And Wrap The Hose Clamp Around It

You need to purchase hose clamp, also known as Jubilee Clip, at your nearest hardware store. After purchasing a hose clamp, you need to loosen its screws, which in turn, can help you fix an office chair. You need to wrap the hose clamp around the metal cylinder after you pull on the end that has the belt. It is important to complete every step of the process correctly before you tighten it. You need to improve the grip of the clamp, due to the fact that it is going to need a very tight grip in order to hold the chair up. To do that, you need to grab the cylinder and wrap a strip of rubber or duct tape around it.

Step 4: Tighten The Hose Clamp

After completing the above steps correctly, now, it is time to tighten the hose clamp as tightly as you possibly can. Take hold of the top of the cylinder before sliding the clamp up. It is important that the ergonomic chair has the proper height before you finish the step. As soon as you guarantee that everything is alright, you need to pull the hose clamp. Then, rotate the screw in order to tighten it.

Step 5: Test The Chair

Finally, you need to test the office chair in order to determine if it works or not. After tightening the hose clamp, you can be able to slide the chair down past it. Or, it should not be sinking in spite of the fact that you did all the hard work. On some occasions, in spite of the fact that you tried your best to adjust the chair correctly, the chair still might be at the wrong height. If that happens, you don't need to worry, instead, simply take hold of the clamp and move it higher or lower on the cylinder. Additionally, sometimes you may notice that the clamp might slide off. In that case, you need to take hold of a strip of rubber and fasten it in order to tighten it again.