Easy Ways To Fix The Missing Chunk Of Wood
There are a number of ways that can be used to fix the missing chunk of the wood, however, the best of them are given below. Follow the given ways carefully in order to achieve better result:
Using A-Wax Filler Stick
- Rub: The first step in this process is to rub the filler stick on the affected area, it's very important to choose the color that matches the wood, simply continue rubbing until the gap is filled.
- Blend The Filler: The user can blend the filler with the help of the fingers, try to make it level with the surrounding as much as possible, in case the filler spread beyond the affected area then it can be easily cleaned.
- Wipe: In this step the user needs to wipe away the excess filler with the help of the rag, rub the rag around the edge of the affected area. The easy way to level the filler is with the credit card.
- Dry: Now let the filler to dry for almost 30 minutes, once the filler is dry it will be hard to touch, if needed add more filler.
Applying Wax Filler Putty
- Wood Filler: In this step the user needs to mix the wood filler with the supplied catalyst on the flat surface, mix the application well before applying it to the affected area.
- Apply: The application hardens very quickly, so it's very important to apply it very quickly. With the help of the putty knife apply it to the affected area.
- Sandpaper: Now the next step is to smooth the affected area with the help of the sandpaper. Carefully press the sandpaper very lightly on the affected area, rub the sandpaper in the directions of the grains of wood.
- Wipe: Once the sanding is done the next step is to wipe off the excess filler with a damp cloth moistened in lukewarm water but not soaking it.
- Sealant: At last, the user needs to finish the affected area with the sealant like polyurethane, it is very important to use the same sealant as used in the rest of the area. Apply the sealant with the help of rag, apply the second coat once the first one dries.
Wax Paints
- Sanding: The first step in this process is to sand the area with the 180 grit sandpaper, carefully sand the area in the back and forth direction going in the directions of the grains.
- Cleaning: After sanding the next step is to go for cleaning with the help of the microfiber cloth dipped in the lukewarm water. Wipe the cloth in the directions of the grains.
- Lacquer Brush Pen: Now fill the bottom of the affected area with the Lacquer Brush Pen, choose the color that should be similar to the wood color.
- Mix Wax Paint: In this process, mix the wax paint together to form the shade of the wood, then with the help of palette knife spread the paint on the affected area.
- Smooth The Painted Area: Before the paint becomes full dry smooth the area with the 180 grit sandpaper as it is much easier to remove.
- Protect: At last protect the area lacquer spray or any other sealant.