7 Easy Steps To Fix A Metal Gazebo Frame To A Cement Patio
In order to fix or secure a metal gazebo frame to a cement patio, the users need to follow below given steps without skipping any step:
- Construct: The first step that the user needs to do is to construct the frame according to the instructions of manufacturer.
- Level: The next step is to level leg of the gazebo with the help of the leveler simply, place the leveler on one leg of the gazebo but here the user needs to make sure that it should plumb.
- Drill: In this step the user needs to use the drill with the 1/2 inch bit, now at the bottom of the leg place the bit through the ready drilled slot. This will help to rest it against the concrete firmly.
- Concrete Surface: Now, the user needs to drill the hole where the legs will be attached, but the hole should be straight down into the concrete, in order to expose the drilled hole, simply slide the gazebo legs.
- Cleaning: In this step the user needs to clean the hole with the help of the pipe brush. For any kind of leftover dust use the vacuum cleaner that should be equipped with the hose. After performing the cleaning process then put the wedge anchor and carefully tap it with the help of the hammer. In order to place the gazebo leg back over it simply remove the nuts of wedge anchor.
- Washer: Now, slip a good quality washer over the bolt of the wedge anchor then thread on the nut. The user needs to tighten the nut until it is fully tight.
- Repeat: For every gazebo leg repeat the same process. In order to protect the exposed nut from being rusted use the good quality rustproof paint spray that should be of the same color as gazebo legs.