Three Easy Methods Of Finishing Raw Carpet Edges
If you are looking to make an area rug from a carpet remnant or from a part of broadloom carpet off a roll, there are numerous options when it comes to finishing the edges in order to prevent fraying. The most common options for carpet finishing include binding, serging, and fringing. All the methods are mentioned below, go through all of them carefully and choose the one that suits you the best.
Method 1: Binding
- Binding is regarded as one of the straightforward as well as affordable methods when it comes to finishing a carpet edge. Binding the edge of a carpet presumes covering or enclosing a strip of fabric, which is usually made from either polyester or cotton, on every side of the edge of the carpet and sewing it in place. You can do this with a carpet-binding machine.
- The reasonably low cost, as well as the immense collection of binding materials, are some of the benefits of binding a carpet edge. There are a huge range of colors from which you can choose in binding, which in turn means that almost any color of carpet can be matched. By complementing the binding to the color of the carpet, the edge of the carpet will form a harmonious combination properly.
- You can also select a contrasting color in order to create an accent, however, the majority of the experts feel that the binding is so thin (1/4-inch) that the overall effect is very strange or unusual.
- Binding a carpet edge at home is an easy task which you can perform yourself. After cutting the carpet remnant, put the binding tape in 6-inch increments completely around the edge of the carpet. Put or spread a little amount of hot glue to where the binding tape links or connects on either end to seal it together.
Method 2: Serging
- Serging the edge of the carpet pieces is another simple method that gives your carpet a look that seems hand-sewn, in spite of the fact that it is usually done by machine. Serging is also known as overlock stitching, which is done with the help of a special machine designed for the purpose.
- Serging is virtually always more expensive in comparison to the binding. When finished, a serged edge seems as though a thick fiber has been covered or enclosed on every side of the edge of the carpet constantly, which creates a higher-end look as compared to the simple binding.
- This is a kind of carpet stitching that is generally seen on manufactured area rugs. Serging is also available in a huge range of colors, in spite of the fact that many places may have fewer choices in serging colors than in binding colors.
Method 3: Fringing
- Fringing is a well-known as well as an exemplary finishing treatment for area rugs. In hand-knotted rugs, the fringe is necessary, due to the fact that it is the edge of the “backbone” fibers of the rug. On machine-made rugs, fringe is only for the way that area rug looks and has no practical purpose.
- Fringing is generally more expensive as compared to either binding or serging. The majority of the people enjoy the appearance of an area rug with fringe, however, there are only a handful of people who find it to be annoying.
- It makes the rug hard to vacuum, for instance, due to the fact the ends get sucked into the vacuum and tangled. The fringe is also easily stained or soiled and generally hard to clean.