Applying finish to your stairs will make sure that they look brand new & fresh always. Wood finish products will help in safeguarding your stairs from damage, moisture, as well as stains, and make them easier to clean. However, finishing stairs can be a difficult task as compared to finishing the walls or cabinets, due to the reason that the way you apply the finish, and where you start, can hugely have an impact on the overall result. If you finish your mahogany stairs properly, it will show off its rich, deep color. Long-established stain interchanges the wood's color, sometimes extremely, in order to match it to the surrounding decor. As far as mahogany is concerned, the wood's natural color is the point of attraction.
Step By Step Instructions Of Finishing Mahogany Stair Treads
Fresh mahogany wood has a deep as well as a reddish-brown appearance. However, it is porous and needs a sealant in order to make it smooth. Proper finishing of mahogany stairs can take a lot of time, but the finished product is considered one of the best when it comes to making it look beautiful & attractive. In order to finish Mahogany stair treads, go through the below-mentioned steps carefully & achieve the desired result of your work:
- First of all, safeguard the walls as well as floors around the stairs. Affix the newspaper to the walls across the steps with the help of masking tape. Wrap the floor with a tarp in order to prevent drips from ruining the adjoining flooring.
- The next step is to sand the fresh mahogany stairs with the help of an orbital sander using 120-grit sandpaper. Gently sand the wood smooth, uncovering the deeper grains. Be extremely careful on the edges of the stairs & make sure not to damage the adjoining walls or handrails.
- After that, clean away all the debris from the area with the help of a vacuum cleaner. Get rid of any sawdust from the sanding process with the help of an industrial vacuum before continuing.
- Now, put or spread a layer of bleached shellac with the help of a paintbrush. The clear sealer will help safeguard the natural wood grain. Allow it to dry for nearly 24 hours before moving forward with the project.
- Sand the stairs again with the help of 120-grit sandpaper on an orbital sander. Make sure not to press down hard. Allow the sander to glide over the sealed stairs in order to smooth out any bumps.
- Finally, spread a clear coat with the help of clean white cotton cloth. The cloth will help for the smoothest application. Give it some time to dry completely, before adding a second coat of the clear finish.