How To Dry Wood Without Splitting: Easy Steps



General Overview

The drying of wood is possible at home if done using the systematic approach. The wood tends to lose moisture that results in drying, cracking or splitting it. However, losing moisture from the wood cannot be stopped but the process can be slowed down using the various methods like by applying the commercial solutions and seals. Some best steps to dry wood splitting it are mentioned as below.

Easy Steps To Dry Wood Without Splitting

The steps to dry wood without the splitting are mentioned below:

Items Required

  • Aluminum paint, White wood glue.
  • Spar varnish, 2 disposable 2-inch paintbrushes.
  • 2 plastic buckets, Rubber gloves.

Direction

The directions to dry the wood without splitting are as follows:
1.Create A Solution: Take a plastic bucket and pour aluminum paint and spar varnish into it to create the blend.
2.Application: Apply the solution to all the ends of the wood whether log or lumber at the same time rather than providing the gap within coats.
3.2-inch Brush: All the ends of the wood needs to be painted using the 2-inch brush. Application of the double coats on each end is recommended.
4.White Glue: The white glue and warm water need to be added in the bucket and apply to the ends of logs/ lumber to create the sealer. Ensure to apply this mixture in liberal amounts. The coats must be applied using a 2- inch brush. Continue applying the coats till the wood stops soaking it.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved