How To Dry Carpet After Leak: Easy Process Of Drying Your Carpet After A Leak

Easy Process Of Drying Your Carpet After A Leak

Water damage will create or cause havoc on carpets, and drying them can be a very tricky task to undertake. You will need to be patient with the process of drying your carpet. It can easily take at least 24 hours to dry the carpet when you are working under the best of circumstances. However, it can take several days when conditions are not perfect for drying. If you are looking to dry your carpet after a leak, then go through the below-mentioned easy steps carefully & you will achieve the desired result of your work:

Step 1: Absorb All Moisture From The Carpet

Position large thick towels over the wet areas before walking over the towels in order to help absorption. Leave the towels for at least 30 minutes and change them as soon as they get soaked through. You can also use a wet vacuum, which are not expensive and can also be rented. If your wet carpet is remarkably soaked through, then it is important to call in expert carpet cleaners for assistance.

Step 2: Turn On Fans, ACs And Open Windows

In spite of the fact that the towels are absorbing up the bulk of the water, you will still need to get airflow going around the room. Ceiling fans or freestanding fans can be used and turned on in order to make sure that air flows across the wet area. If you have an air conditioning unit, you can also turn it on. Open windows also in order to increase air flow around the room, which in turn will help eliminate any musty smells from the room that may have built up from the wet carpet.

Step 3: Rent Or Buy A Dehumidifier

Dehumidifiers are the best options to use in rooms that are vulnerable or susceptible to moisture and mold growth. If you are living in a flood prone area or you frequently get leaks in your home, then a dehumidifier will help pull the moisture from your property as well as prevent mold build up.

Step 4: Get Your Carpet Steam Cleaned

Another important way is to steam clean your carpet at a super high temperature that will help kill any toxins in your carpet. Even if you are cleaning a carpet after it has been wet, it is possible that the bacteria are still left deep down in the carpet fibers. Steam cleaning will be able to reach these nasties and help get rid of any mold spores.

Step 5: Use Baking Soda To Remove Trapped Moisture

When it comes to less significant patches of wet carpet, one of the best options to use is a home remedy, such as baking soda, which will be very effective. After you have absorbed most of the water using towels, sprinkle baking soda over the wet areas and leave for at least 30 minutes. Vacuum up any remaining baking soda, which will make your carpets look pretty fresh.

Step 6: Get Experts To Assess Your Carpet Padding

If in case a sufficient amount of water has saturated into your carpet, then he padding underneath may have been affected. A professional carpet cleaner can check out your carpet padding in order to see if it needs replacing. If carpet padding is left wet, then again this can give rise to mold growth and an unsanitary air quality in your home.