Steps And Items Needed For Distressing A Painted Door
Distressing is the process of making your door look weathered & old as well as giving it texture and a rustic, homey appeal. First of all, you need to collect certain items required for the distressing process & then go through the below-mentioned simple steps carefully in order to make your painted door look distressing and rustic:
Items Needed
- Paint For Base Coat
- Casement Color Paint
- Crackle Medium
- Vaseline
- Paint Brush
- Paint Sprayer
- Door Material
Step 1: Paint Your Door
As far as a distressed look is concerned, for a chipped paint-like finish, you need to choose your base paint and then start brushing or spraying. One of the best finishes that can make your chipped paint look exceptional includes an Algonquin beige/brown base put together with a nice white, grey, or even sage green Casement finish. It is the perfect amalgamation in order to make a door look old and rustic. Don’t worry about painting two coats, due to the reason that this is just the base layer. And the best thing is that it doesn’t have to look perfect. In fact, imperfection is an important factor in making your door look distressed in a very unique way.
Step 2: Apply The Crackle Medium
As soon as your paint has fully dried, start brushing on the crackle medium. It is a clear application, the thicker you brush, the larger the cracks. On the other side, a thin coat will result in smaller cracks in your finish. You have to make a decision about how much cracklature you are looking for to put into your distressed look. Give the crackle finish or spray nearly two to three hours in order to dry entirely.
Note: Position your door down flat at the time of applying the crackle in order to get an even distribution and no leaking or pooling. Underneath the door, place a tarp, newspaper, or cut up trash bags in order to safeguard your floor from any drips while drying.
Step 3: Apply Vaseline For Extra Distress
For a little extra distressed look on your door, rub some Vaseline all over the edges of the door panels as well as other spots where the paint would, as may be expected, rub with the passage of time. This distressing process on your new or old door makes it look more natural as well as authentic.
Step 4: Lay Down Your Casement Paint Color
In the case of over brushing crackle medium, you can finish up with a gunky, finished product. Contradictorily, for only one brushstroke of paint on the crackle, you can conclude with unnatural-looking brush strokes, particularly on large surfaces, like a door. To solve this problem, use a paint sprayer. Put in your entire 500 ml bottle of Casement color paint into the sprayer and then mix the solution having a 10% ratio of water.
Note: Before spraying your Casement paint, become accustomed to the sprayer as well as for delivering a steady, even spray. Directly spraying your door is not a good option, instead, first, test your sprayer on a piece of cardboard or another disposable surface before applying it to your door.
Step 5: Watch It Crackle
After applying a thick coat of Casement paint, you can relax and watch the snap, crackle, as well as pop magic taking place. Within a few minutes, you can see the finished product of your distressed wood interior doors.
Step 6: Remove The Vaseline
Now, you will be able to see how your new distressed door will look like as it crackles in front of you. As soon as it’s rigorously dry, it is time to wipe away any Vaseline traces, that you applied on the panel edges, with the help of a clean rag. This will help reveal more of that beautiful brown undertone as well as increase the weathered look. Finally, your painted door has a distrresing as well as rustic look.