Step By Step Process To Disassemble A Sleep Number Bed
The sleep number bed usually consists of the air mattress and also comes up with the hand controller device, an air pump by which the users can easily alter the air pressure that needs to get within the mattress. Moving up the sleep number can be very difficult and disassembling up the sleep number is a more complex rather than the normal beds but the users can easily disassemble the bed by gathering perfect tools and the right techniques. The users can disassemble the sleep number bed at home by gathering a 7/16 inch socket and following the below-described steps:
Step I- Dismantle The Mattress
- Take Help From Other Person: Start by asking the help in the disassembling process from any friend or from any member of the family. The proper disassembling process of the bed requires the help of almost one person and specifically for the beds that are having the adjustable base. By asking help from another person can make the disassembling process safer and simpler.
- Unbind The Mattress: Then unbind the mattress and to do so the users need to make sure that the mattress lays in the flat position. After that, place themselves at their bed head and then find out the zipper of the mattress in between the base and the cover of the pillow. The duvet styled beds usually consist of the two zippers and if there are two zippers then the users need to unzip the base zipper that is hidden beneath the mattress edge.
- Detach The Hoses: Then the users need to detach the hoses within the mattress and to do so they need to find out the tab at the bedside at the point where the hose is affixed with the air chamber of the bed. Then they need to lift up the hose outwards of the cover of the mattress within the cover opening. If in case the sleep bed is having the 2 connections of the hose then they need to detach both of the hoses.
- Detach The Components: Then they need to detach the internal components of the mattress and this consists of the foam border, air chambers, and the edge locks. Once the users detached all the materials then they will reach the mattress base accordingly.
Step II- Packing Up The Mattress
- Unplug The Control System: Start by unplugging the control system of the bed and the control system of the bed is the big white-colored box unit and the hoses are affixed to this box unit. The users need to unplug this control system from the surface of the wall and then place this control system including its remote control tightly within the packaging box and then enclose it with the packaging material as well. By placing the system within the box forbids the system exposure to the unneeded vibration and the shock that can easily destroy it.
- Place The Dejected Chambers: Then the users need to place the dejected air chambers within the box and they need to be assured that they are also enveloped with the packaging material so that the air chambers won't get damaged or punctured.
- Depart The Mattress Cover And Foam Pads: Then they need to depart the comfort pads of the foam and the cover of the mattress. They need to insert the comfort pads of the foam and the cover of the mattress within the double bag. By doing so the users can easily forbid the comfort foam pads and the cover of the mattress from getting stained while transport.
Step III- Dismantling The Modular Or The Adjustable Base
- Detach The Mattress Retainers: Start by detaching the retainers of the mattress as the retainers hold up the mattress in the place. The users need to use the 7/16 inch sized socket to unfasten the bolts that hold the cover of the mattress beneath the adjustable base. Then they need to place aside all the hardware and the bolts so as to use them again while assembling the bed. By doing so the users can easily accomplish the dismantling process of the bed that is having the adjustable base.
- Slide All The Panels: Then they need to drift all the panels off within the frame of the bed as each panel will get directly off within the left or right side of the bed. The users do not require any specific tool to drift up the panels from the frame of the bed.
- Detach The Legs And The Side Rails: Finally the users need to detach the side rails and the legs as well and to do so they need to unfasten the nuts and then remove the legs within the bed frame base. They also need to drift out the pins within the side rails and from the support beams as well. Once they detached all the pins they need to save it in the hardware bag respectively. The users also need to insert all the beams and the panels within the packaging box so as to prevent all the components from getting damaged during the transportation process.