How To Cut Travertine Pavers: Step By Step Instructions Of Cutting Travertine Pavers


Step By Step Instructions Of Cutting Travertine Pavers

The majority of the homeowners usually prefer to use travertine pavers in their outdoor areas, due to the fact that they are very much durable and have gorgeous finishes. Installing travertine pavers is not a difficult task if you have a bit of experience. However, if you are new to this installation project, then it is a good idea to consult a professional. When you decide to go for the installation of travertine pavers, it is highly possible that you will need to cut a few pavers in order to fit into whatever space you are covering them with. If you are looking to successfully cut travertine pavers in order to make sure that you can use them for all sorts of outdoor areas, including patios, driveways, garden paths and more, go through the below-mentioned step by step instructions carefully:

Step 1: Get The Right Tool

In order to cut pavers you will need several tools which are thicker than tile. Some of the important tools that you will need include circular saws, wet tile saws, miter saws and masonry saws. But you need to make sure that your saw has a diamond blade, which is one of the important things to remember. Due to the fact that diamond is very hard, it makes quick work of pavers as well as gives you smooth, even cuts. The type of saw you select is entirely dependent up to you, but you must know how to use it properly before you start the project.

Step 2: Measure And Mark

As soon as you are set up, figure out how you need your travertine to be cut. You need to take exact measurements and use a pencil in order to gently mark where each cut will go on the surface of the paver. You may need to use a tool to score this line into the paver when it comes to making it easier for the saw to cut through.

Step 3: Adjust The Saw

When you are crystal clear about what needs to be done, adjust the cutting depth of the saw. You need to make it a bit less than the thickness of the paver in order to make sure that it won't cut into the surface beneath the paver, particularly, if you are using a circular saw. The directions from the manufacturer of the saw can give you all the details about the exact specifications you need.

Step 4: Put On Your Equipment

As soon as you start cutting travertine pavers, it is extremely important to put on safety goggles as well as a dust mask in order to make sure that the stone debris doesn't get into your eyes, nose or mouth.

Step 5: Saw Away

Finally, turn on the saw and run it over the travertine or push the travertine into the saw, which is entirely dependent on the type of saw that you are using. Always remember to keep your fingers clear of the blade and to shut the saw off when you are done. After making the cuts, you need to sand or shape the edges.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved