Three Easy Parts To Cut Replacement Furniture Glass
Are you going to cut the replacement of your furniture glass? then here are the 3 easy parts to cut replacement furniture glass yourself without wasting your precious time. Simply go through all the given parts to get the best result of your hard work:
Part 1: Polishing The Chips
Here are the steps for this process:
- You can start your work by polishing chips. You can easily sand the area of the chip by using the sandpaper(300-600 grit) until the point of the problem is smoothened out.
- Now, you have to clean all the debris which comes after the sanding process, now you have to take a silver polish and then brush it on the chip.
- You know that to paint the glass of furniture edges will make that chip look like a part of the frame or a rim.
- You can also choose different colors on the glass but you need to remember that you don't have to stick to the traditional color as most of the people use simple and elegant color.
Part 2: Replacement Of The Glass
Here are the steps for this process:
- If you see that the glass is broken and you have to replace it for your furniture, then you need to buy a glass panel that exactly shows you the quality of the original glass of your furniture glass.
- You can also take a piece of glass as a sample to the store. You need to measure the space of the glass which is broken properly and allow for extra cutting space.
Part 3: Cut Replacement Glass
Here are the steps for this process:
- You have to wipe or wash the glass clean, now lay it on the cutting mat.
- Now, mark and measure the area which you need to cut. Color tapes are also used to mark the areas.
- Now you have to stick the tap back from the glass, so it will not get in the way of cutting.
- You need to get a cutting wheel or a meter stick. Now place the glass cutter on the edge where you want to cut the first line.
- Slowly-slowly roll it over the other end of the line. Let the glass snap itself and draw a line with the help of a pencil on the cut line. Now you have to apply soft pressure to help the glass snap.
- Cut the other lines in the same pattern and then snap that areas with the help of the pencil.
- You should never forget to wear eye gear or the goggles for the safety of your eyes and also wear gloves to protect your hands.