How to drill the Faucet Holes In Laminate Countertop
Here are some of the steps by which the customers can easily drill the Faucet Holes In the Laminate Countertop:
- Cover The Drilled Spot: The customers need to start by deciding the exact spot where they want to drill the hole in the countertop. The customers then need to cover the drilled spot on the countertop by using the masking tape and then mark the drilling spot by using the marker.
- Use an Electric Drill: The customers then need to use an electric drill and insert an exact sized bit in it. The customers then need to Place the bit tip directly to the marked spot on the Laminated Countertop. They then need to place an electric drill at an angle of the 90-degree so that the bit won't get slipped from the surface of the laminate Countertop.
- Gently Compress The Drill: The customers then need to gently compress an electric drill in order to allow the bit to pierce through the surface of the laminate countertop. The customers should avoid using an electric drill at high speed because this can let the bit to get slipped from the countertop.
- Turn The Drill To The High Speed: Once the bit has pierced into the laminated countertops the customers then need to turn an electric drill to the high speed. The customers then need to apply the gentle pressure to the bit until it won't get fully penetrated into the laminated countertop. The customers finally need to detach an electric drill and then turn off the drill accordingly.