Instructions Of Covering Kitchen Cabinets With Vinyl Paper
If you are looking to update your kitchen cabinets, then a remodeling option is available in the form of vinyl paper. Replacing your kitchen cabinets can be very expensive that majority of people can not afford it, however, vinyl paper offers an easy makeover option which is economical that anyone can afford. Apart from that, vinyl paper offers an easy-to-clean surface in your kitchen. Above all, installing the vinyl paper is quick as well as an easy process, therefore, it is a good option to cover your kitchen cabinets with vinyl paper which will give your cabinet a new brand look.
Items Needed
- Measuring Tape
- Vinyl Paper Rolls
- Pencil & Screwdriver
- Scissors & Squeegee
- Sharp Knife (Optional)
- Small Pin (Optional)
Step By Step Instructions
- Measure Your Kitchen Cabinets:
First of all, calculate or compute your kitchen cabinets in order to ascertain or establish how much vinyl paper exactly you will need. Check the size of each roll of vinyl paper, due to the fact that the amount you need is also entirely dependent on the amount that is provided on each roll. - Select The Pattern Of Vinyl Paper:
Now, choose the pattern of vinyl paper that you are going to use. Manufacturers are usually offering an increasing number of options, therefore, you can select from variety of options such as a faux wood-grain look or something entirely different, which will suit the style you want in your kitchen. - Wash The Cabinet Faces & Cover Them With Vinyl Paper:
Wash the cabinet faces using warm water and a mild soap. Allow them to dry entirely before covering them using the vinyl paper. - Remove The Cabinet Handles:
Now, pull out the cabinet handles & make sure to Keep all of the hardware together so that reinstallation is a simple job. Calculate the cabinet face, and cut out the vinyl paper in accordance with that calculation. Hold it up to the cabinet in order to make sure that the calculation is accurate. If your cabinet face is larger in comparison to the roll of vinyl paper, then you will need to align two pieces in a straight line carefully and it is important that the seam isn’t obvious. - Remove Adhesive Backing & Apply The Vinyl Paper:
Remove the adhesive backing before applying the vinyl paper to the cabinet face quickly. Smooth out any wrinkles or air pockets with the help of a squeegee by running it through the vinyl paper. Reattach the cabinet handles, making sure to check for where they are located underneath the paper in order to avoid making excess holes.
Useful Tip
In order to prevent cutting the vinyl paper too small for the cabinet face, you need to cut a piece that is, to a small degree, larger than the calculations and cut off the excess with the help of a sharp knife. If there are remaining air pockets underneath the vinyl paper, then you can use a small pin in order to prick the air pocket and release the air. Prevent pricking the vinyl paper too many times, due to the fact that this can create wrinkling on the surface.