Best Way To Cover A Beam With Wood
Wrapping the beam with the wood will give a vintage look or charm to any room or space. It is very easy to cover the beam with wood just requiring few things. Firstly it's very important to select the type of material that should be used to cover the beam. Once its done then cut the material according to size. Below are the types of material and steps to cover the beam.
Selecting Material
- Hardwood Flooring: In case the customers want a quick wrap then they can use the hardwood flooring. The flooring comes in pre-colored options so it can be wrapped within no time.
- Authentic Look: For the authentic look use the faux wood beams, they are available in the three-sided beams that are made from the synthetic material and are designed in a way that it can be easily wrapped over the beam.
- Lumber: In case the user wants to stain the wood with a particular color, then use the wood of any type, the user needs to buy the lumber three times to the length of the beam.
Steps To Cover A Beam With Wood
- Cut The Wood or Lumber: The first step is to cut the lumber according to the size of the beam, for the exact size it's very important to measure the beam then cut the wood accordingly.
- Vintage Look: For the vintage look distress the lumbar, in case of the new wood take the hammer, pole or chain then start beating the wood, this process will give the wood the vintage look that has the natural wear and tear from ages.
- Stain Or Paint The Wood: In case, of the new wood simply brushwood with the paint or stain from all the sides in the color of choice, and let it dry for almost 24 hours.
- Nail The Lumbar: Once the lumbar or wood is dried then use the good quality wood glue on the back of the wood after that place them on the beam, in order to hold it down use the nail gun or hammer and nail it. For the best results nail the wood after every 6 inches.
- Metal Straps: In case the user wants to make it look more attractive then add the metal straps after every feet, it can also be used to hide the seam where the two wooden lengths meet each other. The metal straps have the predrilled holes if in any case it has no hole then make sure that the metal strips should be thin enough so that the screw can be drilled easily.