How To Connect Laminate Countertops In The Corners: 5 Easy Steps Of Connecting Laminate Countertops To Corners


The laminate’s persistence and relative affordability make the laminate a very popular countertop choice in your kitchens. With the age of time and use, your laminate countertop can also become very dull and also show scratches. You can avert going to the expenditure and trouble of your new countertop installation by simply using a non-abrasive cleaning & polishing solution in order to help restore the gloss of your old laminate countertop. To help manage your laminate countertop’s restored good looks then you just need to look for a product that contains wax as well as the laminate cleaner. A perfect quality laminate polish will also help obscure any light scratches. Keep in your mind, nevertheless, that any deep gouges or scratches in your laminate surface will also require the use of the laminate fill paste prior to waxing & cleaning. To find a paste that exactly matches your laminate countertop, simply consult the manufacturer of your laminate countertop surface.

5 Easy Steps Of Connecting Laminate Countertops To The Corners

For the corner in the kitchen area where you are going to install a countertop, there should be a countertop material having the corners miter-cut, which is totally dependent on your kitchen dimensions. It will help you in joining the two pieces of countertop together before setting them in place on the cabinets. In order to connect laminate countertops to the corners, go through the below mentioned easy steps carefully:
  1. Set Up Saw Horses: First of all, place three sawhorses in an L-shaped arrangement. Protect the sawhorses with the help of old sheets, which in turn will help you protect the laminate pieces as well as to prevent the glue from dripping onto the floor.
  2. Align The Fronts & Backs Of The Laminate: Put down the two sections of countertop on the highest or uppermost point of the sawhorses so that the laminate side is facing up and the corners are together. Make sure that the fronts, as well as the backs of each piece, line up with each other. Check the bottom of the miter joints to be sure that the mortise joints line up as well. There are generally three or more of these cut into both sides of the joints. The miter bolts that secure the pieces together adjust inside the mortise joints.
  3. Waterproof Wood Glue: Now, separate the sections apart by a great deal so that you can apply a plentiful bead of waterproof wood glue on both sides of the miter. Squeeze the two pieces back together again. Line up the front as well as the back edges once again.
  4. Miter Bolt: Place a miter bolt in the mortise adjacent to the front of the countertop. With the help of a 7/16-inch wrench, secure the bolt tightly so that it doesn’t fall out of the mortise. Next, position a miter bolt in the mortise closest to the back of the countertop and secure it tightly as long as it remains in place. Continue this process for the rest of the miter bolts. The countertop joint should be fixed tightly at this point. Make sure not to move it as long as the glue completely dries. Go through the label on the glue for the suggested drying time.
  5. Wipe The Glue Before It Dries: Finally, remove the glue from the countertop’s surface with the help of a damp cloth before the glue dries. Prevent the water from getting in the joint otherwise, it might affect the glue’s bonding capacity.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved