How To Clean Wood Furniture With Vinegar?
In order to clean wood furniture with vinegar, the user needs to follow the below given procedure:
Dust Removing:
Before cleaning the wood furniture with vinegar, the user needs to remove dust from it first by following the below-given steps:
- Remove Cushions & Hardware:
First, the user needs to set aside the cushions, pillows, and other objects from the wooden surface. Also, the user needs to take off hardware that he can pull back on once the cleaning process finishes such as knobs & screws. The user needs to make sure not to touch the hardware that is holding the furniture together. - Dust Or Vacuum The Furniture:
After that, the user needs to wipe the furniture down using a dampened cloth or else vacuum clean the surface & cracks of the furniture using a non-spinning brush attachment because the spinning brush can leave scratch marks on to the furniture. - Clean Cushions:
The next step will be to clean the cushions of the furniture according to the manufacturer's tags.
Vinegar Solution Cleaning:
Once the furniture is dust free, the user can apply a vinegar solution on to it by following the below-given steps:
- Prepare Solution:
The first step will be to prepare a dilute white vinegar and water solution by mixing three tablespoons of vinegar that is equal to 45 ml in a cup of filtered water that is equal to 240 ml. - Test The Solution:
Before proceeding to clean the whole furniture, it is necessary to test the solution at a hidden spot on to the furniture that can't be easily spotted. The user needs to moisten the cloth in a solution that should not be dipping and apply it on to the test spot. After that, the user needs to buff the spot dry using a clean cloth and if there is no negative change on to the furniture, the user can proceed with the cleaning process. - Clean The Whole Furniture With a Solution:
In order to clean the whole furniture with a solution, the user needs to dip a clean rag in the solution or spray the solution on to the rag and wring out the cloth completely. After that, the user needs to rub the cloth on to the furniture in circular motions or in the direction of the grain in order to get water marks off it. The user can rinse the cloth when dirty or switch to another cloth in order to clean the whole furniture. - Buff The Excess Moisture Out:
The last step will be to buff the excess moisture out of wood furniture using a clean cloth in circular motions. In case during buffing, the user finds spots that are not cleaned, he can repeat the cleaning process on those spots and buff the spots afterward respectively.