Easy Cleaning Process Of A White Carpet Using Bleach
Bleach is regarded as one of the best options when it comes to making white carpets even whiter. However, you need to take certain precautionary measures while dealing with bleach as it is a potent chemical that may cause damage to your skin and respiratory system. If you are looking to clean your white carpet using bleach, then go through the below-mentioned simple steps carefully & try to achieve the desired result:
Step 1: Vacuum The Carpet To Remove Any Surface Dirt
With the help of a vacuum cleaner, you can remove any solid substances from the carpet as well as firmly fixed dirt that may be hiding within the strands. If you are cleaning an area, run, take it outside and shake it in order to get rid of as much dirt as possible.
Step 2: Prepare The Bleach And Water Solution
Before you start preparing bleach, it is important to wear protective gear including rubber gloves, masks, and goggles in order to protect your confines from direct exposure. Bleach is regarded as one of the potent chemicals that may cause skin as well as respiratory damage. Therefore, you need to make sure that the area you are preparing the bleach solution as well as the area that needs cleaning is well ventilated in order to stop the odor from lingering and causing nausea or lightheadedness. Never use 100% bleach on the carpet, due to the reason that it will worsen the stain. Combine or put together a cup of bleach to a gallon of water, before pouring this mixture into a spray bottle.
Step 3: Mist Bleach Solution
Take a spray bottle and fill it with bleach and water solution in order to mist the stained area. The best idea is to mist the whole area equally in order to prevent any spots, due to the reason that the bleach will lighten the color. Remember that bleach can be very harmful to the backing of the carpet. So, don't allow it to sit for too long, either – leave it for a maximum of 30 minutes.
Step 4: Rinse The Bleach Solution, Then Dry
Finally, it is time to get rid of any bleach residue from the carpet. One of the best options to remove bleach residue is using a spray bottle and a wet/dry shop vacuum in order to extract the excess. If you don’t have a shop vac, then you can use a clean paper or cloth towel and pile up a heavy object like a book on top to soak up the excess moisture. Prevent scrubbing the carpet when you are drying the carpet, due to the fact that it may spread the bleach residue to other untreated areas. Just blot the area as long as all the water is absorbed.
Important Tips
- Do not neglect & overlook the stains and spot clean the stains as soon as possible. The longer the spill remains on the carpet, the chances of getting it soaked into the carpet fibers are higher and padding that is expensive to repair. As soon as the spills dry up and set, it becomes permanent. The unpleasant type of spills are acidic spills that will destroy carpet fibers.
- Also, as soon as a stain or spill first occurs, hold out against the urge to scrub. Doing so only aggravates or intensifies it. Instead, dab the stain with the help of a towel and cleaning solution. The correct method is blotting from the outer part going towards the center. Blotting it outward will only shake out the stain.
- Avoid using bleach on a wool carpet. Due to the fact that the bleach will stain a carpet, make sure to use it only on white or near-white carpets. Using bleach on any colored rug will cause discoloration, mostly lighter spots.
- Prevent the use of bleach on the carpet without first combining or putting it together with water.