Cleaning & Maintaining Your Textured Fiberglass Shower Floor
Your bathroom's fiberglass shower floor can be cleaned to give it new life. Cleaning your shower floor frequently with a nonabrasive cleaner is the secret to keeping it spotless. If you need to get rid of tough stains, you can use baking soda, vinegar, or hydrogen peroxide. Glass can be incredibly gleaming and brilliant. However, it can also be filthy, stained, and dingy. It certainly covers a wide range. Additionally, because it is often white, it cannot be hidden when it begins to look worn. Fiberglass has a glass basis, unlike the majority of bath and shower materials. In reality, fiberglass is melted sand that has been combined with resin and heated to a high temperature. Despite that honorable procedure, fiberglass is just as prone to rust, lime scale, soap scum, and mildew as any other surface. Fiberglass is also extremely susceptible to stains from cosmetics, hair products, medications, bath bombs (yes, bath bombs! ), laundry detergent, and the wide range of possible harm caused by children (e.g., crayons, markers, scuffs from bath toys, etc.).
Method 1: Routine Cleaning
- Use A Nonabrasive Cleaner
Make use of a soft cleaning. It's crucial to only use nonabrasive cleansers on fiberglass showers and bathtubs since abrasive cleaners can harm the surface. Use a mild scrub product, liquid laundry detergent, all-purpose cleanser, or dishwashing liquid. Avoid using abrasive cleaning agents like ammonia or scouring powder. - Apply Cleaner With A Nonabrasive Applicator
Use a nonabrasive applicator to apply cleaning. Only non-abrasive cleaning supplies should be used. Choose a polyethylene, polyester, or nylon-made sponge, brush, or cloth. Avoid using scrapers or steel wool as abrasive cleaning instruments. - Scrub Gently
Clean carefully. The fiberglass surface should not be scratched or dulled. Using a brush, sponge, or cloth that is safe for fiberglass, apply the nonabrasive cleaning to the surface and gently rub it. Remember that some dirt can require the use of a harsher cleaner in order to be removed. - Rinse With Water And Dry
Dry after rinsing with water. After scrubbing the shower floor, give it a quick water rinse. Finally, dry the shower floor from top to bottom with a soft towel.
Method 2: Getting Rid Of Tough Stains
- Treat Tough Soap Scum With Baking Soda
Use baking soda to get rid of difficult soap scum. Baking soda and water are combined until a paste forms. The paste should then be applied to the problem area's surface. The paste should be left on for several hours. Use warm water to rinse. - Use Vinegar To Remove Stubborn Grime
Vinegar can be used to get rid of tough dirt. Hard water deposits and stubborn soap scum stains can be removed with vinegar thanks to its strength. Apply vinegar to the trouble spot. Give it time to sit for a while. After that, scrub the stain with a brush or sponge that is safe for fiberglass. - Eliminate Tough Stains With Hydrogen Peroxide
Use hydrogen peroxide to get rid of stubborn stains. Cover the stain with many layers of white cloth, and then totally cover it with hydrogen peroxide. The fabric should be left on the stains for the entire next day before being thoroughly dried. - Remove Mildew Stains With Bleach
Try using bleach to get rid of mildew stains. Chlorine bleach can be used to eliminate stubborn mildew stains from the fiberglass shower floor. Put a little bit on the stain. Spend some time letting the bleach work its way into the stain. If required, clean the discoloration with a nonabrasive brush or cloth. Use fresh water to rinse the shower floor. - Use Oxalic Acid For Tough Stains
Apply oxalic acid to stubborn stains. To make the oxalic acid, follow the preparation instructions on the product. The stain should next be treated with oxalic acid, which should be left on for 10 to 15 minutes. In accordance with the product's instructions, rinse it off. When using oxalic acid, use protective gloves because it might damage your skin. Eye protection is another smart move.
Maintaining Your Shower Floor
- Clean Your Shower Once A Week
Once every week, clean the shower. If you clean your shower frequently, soap scum and hard water deposits will have a difficult time accumulating. Additionally, routine cleaning might reduce the need for more potent cleaners to get rid of stubborn stains. - Remove Stains And Mildew As Soon As Possible
As soon as you can, get rid of the stains and mildew. You should get rid of any stains as quickly as you can from your fiberglass shower floor. It will be easier to maintain the shower floor and save time-consuming deep cleanings if you remove difficult stains and mildew as they occur. - Restore The Floor With Automobile Polish
Use car polish to restore the floor. You can try to restore your fiberglass shower floor with white car polish if it is very dull or has many scratches. Apply an automotive white polishing compound to the floor after cleaning and drying it. Remove with a fresh cloth.