Easy Process Of Routine Cleaning Stone Grout Shower Floor
Your shower's stone tile will remain in good condition and preserve its look with proper care. Your stone can look brand-new for years with the right maintenance. Your stone tiles can be cleaned of the majority of dirtiness using a mild detergent, a soft cloth, and a soft bristle brush. By determining the type of stain and applying the appropriate treatment, such as ammonia for oil-based stains, stone tile stains can be removed. Maintain your stone tile by staying away from abrasive and acidic cleansers and wiping away extra moisture after each shower.
Step 1: Wipe Away Loose Buildup And Grime
- Clean off any loose debris and accumulation. Warm water should be used to dampen a clean, soft cloth, such as a microfiber one. Wipe down the grout between each stone tile in your shower as well.
- You will be able to locate and target stains and buildup that is more severe thanks to this. The finish of your stone will be best protected by wearing soft clothing. Over time, rough fabric may cause your stone's surface to haze or pit.
Step 2: Scrub Grout With A Toothbrush And A Mild Detergent
- Use a toothbrush and a light detergent to scrub grout. A prime spot for accumulation is the little, grout-filled spaces between the tiles. To clean the grouted cracks between tiles, use a toothbrush, warm water, and a mild detergent like dish soap.
- Repeat as required until the grout is clean, then thoroughly rinse the area. Cleaning the grout first will stop the filth from spreading to the tile because it is frequently dirtier than the tile itself.
- When cleaning the grout between natural stone tile, stay away from using standard grout cleaners. These frequently contain substances that can harm your stone. Brushes with stiff bristles might scrape your stone and damage its sheen. When cleaning, only employ soft cloths and brushes with soft bristles.
Step 3: Clean The Stone With A Mild Detergent Or Stone Soap
- Use stone soap or a mild detergent to clean the stone. Warm water and a few drops of a mild detergent, such as dish soap, should be combined. To evenly distribute the soap, stir the mixture. Use a soft rag dipped in the solution to wipe down the tiles, wringing out any excess liquid. While doing so, frequently rinse the tiles.
- Most hardware stores carry soaps made specifically for the natural stone used in your shower.
- Your stone tile may become damaged by acidic cleaners. Use only cleaners that have a pH level of 7, which should be noted on the product material.
- Not always is more soap better. A solution with too much soap in it may leave streaks or a film on the tiles after cleaning.
Step 4: Cut Through Soap Scum With An Ammonia And Water Solution
- It might be challenging to get rid of soap scum, which is a typical issue. Use a mixture of a gallon (3.8 L) of water and a half cup (237 ml) of ammonia to cut through it. Use a fresh, soft cloth to apply the solution to the tile.
- If you clean your stone with ammonia too regularly, it can dull and lose some of its luster.
- To stop soap scum from amassing, keep up with routine cleaning. You will only occasionally need to use ammonia this way.
Step 5: Dry The Stone After Cleaning
The cleaners that can dull or fade your stone, like as ammonia or hydrogen peroxide, should not be left on it for extended periods of time. The tiles should be completely rinsed before being dried with a fresh, soft cloth.