Step By Step Process Of Cleaning A Stainless Steel Table
Unlike the other stain-resistant coatings that can be removed after the repeated cleaning, the layer of chromium will never wear away on the stainless steel, so that the user can never clean the stainless steel too much. Follow the below-mentioned cleaning steps & tips to properly clean the stainless steel table:
- Use a wet cloth and a mild detergent. Most of the time, the best cleaning solutions for the stainless steel table is a damp bar towel, but, if the user wants to use a cleaning agent, that time add a mild detergent with the wash water.
- Start the wiping in the direction of the finish. Some of the stainless steel surfaces usually have a brushed finish or grain, so while cleaning, go with the grain, this is because scrubbing all across the grain can easily damage the finish.
- Use the baking soda for the baked-on grease. When water and the detergent are not enough, that time the best option is to add water with the baking soda to form a paste as this will help to clean more difficult stains. The user can also use a commercial cream cleanser if it is non-abrasive.
- It is highly advisable to wipe up all the spills immediately. Spilled food, like acidic food, can easily damage the protective layer of the chromium if it is left too long, so wipe up the spills with the help of a damp cloth as quickly as possible. Doing this will also help to make it easier for a cleaning job & this is because the food will not be dried.
- Use the glass cleaner to remove any kind of the fingerprints. The oil from the fingerprints can easily etch or tarnish the stainless steel, especially the mirror-polished finishes. Use a glass cleaner to clean the fingerprints at the end of the day's use, before the finish is damaged permanently.
- Quickly rinse off the surface after cleaning. Any kind of the residual soap or the detergent can also be harmful if it is left for a long period of time, so rinse the stainless steel table with the help of clean water and with a damp cloth after cleaning is done. The water spots from the hard water also damage a stainless steel finish. So, simply dry the surface quickly after the cleaning to prevent any kind of water spots from forming.
Things To Avoid
There are a few precautions to keep in mind while cleaning a stainless steel table:
- Chlorine, or the cleaners containing chlorine, will kill any of the bacteria on the stainless steel surface, but will also break the protective layer of the chromium. Instead of that, use an ammonia-based solution.
- The other important point to remember is to never use the rough abrasive sponges and steel wool. Instead, only use the brushes as well as the pads that are made from nylon, soft plastic.
- Stainless steel polishes must only be used if in case the surface becomes scratched or stained because it is a coating that is meant to repair the damage.