Two Easy Methods Of Removing Mold From Basement Walls With Borax
Household mold, as well as mildew, are the most common issues that can appear in basements, particularly, when there is water damage, hydraulic rams, or other moist conditions. Even air conditioners, air ducts, and exterior walls are not water-resistant to mold infestations. Totally dependent on the type of mildew, the infestation can result in a musty smell or allergic reactions, and specific types of mold can be very risky for health. It’s extremely important to learn how to get rid of mold from basement walls and other porous surfaces. Borax is one of the trustworthy as well as effective cleaners that are widely or generally known for its cleansing and deodorizing properties. Due to the reason that borax inhibits mold growth, it is an excellent cleaning solution when it comes to getting rid of mold from cinder block walls and other large areas. There is no need to clean it off when you are finished.
Things You Will Need
- Borax
- Water
- A 1 Gallon Container
- Glass Spray Bottle
- Scrub Brush, Old Rags, Or Sponge
Method 1: Borax Mold Spray
- First of all, make a mixture of 1 cup of borax with hot water in the 1-gallon container, put the lid on, and stir it well. This will help dissolve the borax entirely and faster.
- Put the above-made solution into the spray bottle before spraying it onto the affected area. You need to be extremely cautious not to use excessiveness on porous material, such as unfinished wood or drywall. These materials soak up water, which will encourage the growth of the mold by keeping it moist.
- Now, scrub the area with the help of a scrub brush, rag, or sponge as long as the mold is entirely removed. Wipe the area clean and allow the area to dry completely. You can apply or sprinkle a light misting of the borax mold spray once more.
- There is no need to rinse afterward, due to the reason that the borax will generally prevent the mold from returning until you have handled the source of the mold, such as any leaks or water intrusion issues.
Method 2: Borax Mold Paste
Usually known as the “borax paint”, this method is used to get rid of the mold on wood. It is highly recommended to leave moldy wood in place before applying a mold-killing product to the wood. It is a good idea to remove all moldy material and start fresh.
- First of all, take a 2+ quart saucepan, & make a mixture of 1/2 cup of borax with 2 quarts of boiling water.
- Mix the solution exceptionally well as long as the majority of the Borax is dissolved. Some of the borax will settle at the underside, which is fine.
- With the help of a paintbrush or a rag, protect the complete mold-affected area with the borax paint. It appears exactly like cloudy water but dries white.
- Finally, allow the borax paint to dry completely. You can paint over the wood with the help of mold-resistant paint or primer if you want.