How To Clean Glass Shower Doors With Hard Water Stains: Two Easy Methods To Remove Water Stains From Shower Doors

Two Easy Methods To Remove Hard Water Stains From Glass Shower Doors

The stains of hard water will make the glass appear dull and also has the hazy spots on surfaces. This is because of the build-up of the alkaline as well as the other minerals that are present in the water. The best & easy two methods for removing the hard water stains from glass shower doors are mentioned below:

Method 1: Using Liquid Cleaners

  1. Acidic Cleaner
    • Use the acidic cleaner for getting the best results. Because the stains of the hard water are actually alkaline, so it is a good option to remove the stains with an acid that is powerful. Find the cleaning product that has either the phosphoric, hydrochloric acid or the sulfuric acid. These kinds of acids must be able to strongly break & remove the stains.
    • Readout all the directions that are mentioned on the label of the product as well as apply the cleaner to the affected areas as per the instructions. The cleaning products that are acidic are toxic, so it is advisable to make sure that the user must ensure the safety precautions when working with them, like wearing the eye protection as well as the gloves and also apply them on the surfaces that come in contact of the food, like the kitchen countertops.
  2. Mix Salt And The Water
    The other liquid cleaner option is to mix salt and the water as this solution is used to remove the mineral buildup on the shower door. The salt actually works as a scouring powder as well as will cut through the stain easily. Apply the solution to the affected space and then take a clean cloth for rubbing the stains in the circular motion. Thoroughly rinse all the glass once finished as this will help to remove all the saltwater residue.
  3. White Vinegar
    • The white vinegar can also be used to clean the shower doors of glass. The vinegar is actually an acid, that will help to loosen all the mineral deposits on the door, and it is vinegar that is clear and colorless which is enough to not make any stains. Besides all this, it is also a natural cleaner which means it is not toxic as well as will not potentially burn the eyes or the lungs like other cleaners that contains chemical does.
    • Mix a small quantity of the lemon juice in the vinegar as this will help to enhance the effectiveness of the vinegar and will also add a fresh scent. Put both of the items in a spray bottle and then shake them and also slightly make them warm in the microwave but only for about 20 to 40 seconds & this totally depends on the microwave.
    • The reason for warming the cleaner is to make it even more effective for lifting the stains than the cold or cleaner at the room temperature cleaner. Just make sure to clean the top of the spray bottle so that it will not explode in the microwave, finally spray the solution on the sliding glass door and leave it to stand for about 2 to 3 minutes before wiping it again with the help of the clean, dry and the lint-free cloth or with the paper towel.
  4. Ammonia
    The user can also add ammonia to normal cleaning products, this can help in making super-charging the regular all-purpose window or the glass cleaner just by adding some of the ammonia & this will help a lot to cut down through hard water stains.

Method 2: Using Non-Liquid Cleaners

  1. Scrubbing Techniques
    Start the job with some of the elbow grease. Before using the expensive or the toxic cleaning products, simply use the below-mentioned scrubbing techniques:
    • Use the eraser cleaning pads or the scrubbing sponges that will not make any scratch on the glass and in order to safely scrub the sliding glass surfaces, the user needs to clean as much as possible by scrubbing with one of the sponges but they must be moistened.
    • If the user wishes they can also use the baking soda as an abrasive option, but it is advisable to never use the bristle brushes that are hard or any other cleaning tools that are abrasive for cleaning of glass. The reason is that these kinds of tools can easily damage the face of the sliding glass by scratching.
    • The scrubbing will work best on the little hard water deposits or the newer stains, as well as the one which is not firmly set in.
  2. Brush On Some Toothpaste
    Brush on the toothpaste, most of the home cleaners use the toothpaste alternative to the baking soda. Simply apply little regular toothpaste on to the moist towel and then start rubbing it on the stain in the circular motions. Wait for the few minutes and after that start rinsing it off using the equal parts of the water and vinegar to clean all of the remaining residues.
  3. Use Commercial Paste Cleaners
    There are a number of commercial products for cleaning the hard water stains that are usually available in a paste formula. The main advantage of using the paste on the liquid cleaner is the paste will not leave watermarks or the streaks. One of the downside for using the paste products is the foggy haze that they can leave if it is not buffed off from the glass.
Connect with GetRit Furniture Facebook Furniture Twitter
Copyrights (©) 2020 GetRit.Com   All Rights Reserved