Two Easy Ways Of Cleaning Brushed Nickel Cabinet Hardware
The finish that is used on the brushed nickel tends to be very sensitive and is a bit difficult to clean. When the users start cleaning up the finished nickel then they need to use the smoothest method and they are advised to avoid using the acid or any alcohol-based solvents as it can result up in damaging up the finish of the nickel. The users can also use the diluted vinegar for cleaning up the brushed nickel. The users can easily clean up the brushed nickel cabinet hardware at home by gathering the below-mentioned materials and then following the below-defined ways:
Materials Required
- Soft Cloths, Putty Knife & Mild Detergent
- Water, Microwave-Safe Bowl & Wax Paste
- White Vinegar, Cotton Swab, Bucket Or Spray Bottle
- Paper Clip And A Toothbrush Or Cotton Wool
Way I- Using The Dry And Wet Cloths
- Wiping Down The Surface: Start by wiping it down by using the dry soft cloth. The users need to find the lint-free soft cloth or they can also use the terry cloths or the cotton blend will work great. They need to detach the grease, smudges, and dust particles by rubbing the cloth in the ground motions.
- Break Off The Grime: The users then need to break off the grime by using the damp cloth and the putty knife as well. They need to wet up the cloth with the hot water and then press down the wet cloth directly to the stained area. Then they need to gently use the putty knife and then scrape off the sludge only rather than scraping off the nickel. Then they need to buff off the stained area by using the dry soft cloth.
- Apply The Soap Solution: Then the users require to use the soap solution so as to clean off the hardware of the nickel cabinet. They need to soak up the soft cloth in the soap solution and then rub it directly over the hardware. Then they need to rinse down the hardware by using the soft sponge and the clean water as well. Then they need to allow it to dry completely.
Way II- Using The Diluted Vinegar
- Dilute The Vinegar: Start by diluting the white vinegar with the water and to do so the users need to mix the half amount of the water and the half amount of the vinegar. The users need to detach the hardware within the cabinet and then soak it into the solution accordingly. The users can also use the container that can easily fit within the microwave.
- Do The Spot Testing: Before applying the solution to the entire surface of the hardware the users are advised to do the spot test. The users need to soak up the cotton swab within the solution and then rub it to the hard reached surface of the nickel hardware and then allow it to get dried off for almost half an hour. If in case the users won't find any damage occurred then they need to proceed towards cleaning up the entire surface of the hardware with the diluted solution of the vinegar.
- Warm Up The Solution: The user then needs to warm up the solution of the vinegar in the microwave and then soak up the hardware within the solution and then let it be there for almost half an hour. Then they need to wipe down the surface of the hardware by using the toothbrush or the cotton wool as well so as to clean up all the deposits.
- Rinse The Surface: Then they need to rinse down the item with the wet rag and then make it dry by using the soft cloth so as to prevent the water stains accordingly.