How To Clean A Vinyl Fence: Different Ways Of Cleaning Moldy & Stained Vinyl Fencing


A practical substitute for conventional wooden fencing is vinyl fencing. It doesn't rot, and it typically doesn't require painting. But because vinyl fencing tends to get dirty quite quickly, cleaning it can be difficult. Fortunately, you can clean a vinyl fence by selecting a cleaning product, putting it to your fence, and taking into account alternate techniques like a pressure washer. Any yard would benefit greatly from having a vinyl fence. They are incredibly safe, have a fantastic appearance, and are simple to install. They can, however, get soiled, just like any outdoor furniture. Luckily, vinyl fences are very simple to maintain, unlike many other kinds of materials.
You should utilize several cleansers to get your vinyl fence clean and looking excellent when thinking about how to clean a vinyl fence. If you want to do some preparatory cleaning or other simple cleaning, you can use water. Depending on your demands, you might choose to utilize a power washer or a garden hose. Using a little soap should work the magic on any tough dirt or soil that won't wash off. However, you might want to use a vinyl fence cleaner like vinegar for the trickiest operations, such trying to remove mold or mildew. Additionally, vinegar has the advantage of being efficient against several germs and viruses, including the flu virus and tuberculosis. A vinyl fence may be cleaned in a variety of ways to keep it looking fantastic.

Different Ways Of Cleaning Moldy & Stained Vinyl Fencing

Even though vinyl fencing is renowned for its durability, it is a temporary solution. Your vinyl fence's shine may eventually fade due to exposure to the elements and normal wear and tear. However, there are a few things you can do to clean your vinyl fence and restore its original beauty before you think about replacing it.

Way 1: Spray Off Your Fence With A Hose

Spraying with a hose should always be your initial move when working with a stain, regardless of the kind. With the least amount of harm to your fence, it gets rid of any loose dirt and filth. If you want to get a bit more bang for your buck with this step, try adding a high-pressure nozzle. With this approach alone, you'll discover that the fence will frequently look as good as new.

Way 2: Using Vinegar

  • A vinegar solution can be used to get rid of a lot of accumulated dust, dirt, and mold. Use the ratio of 12 cup vinegar to 1-2 gallons of water to combine the vinegar and water. If you want more cleaning power, you may also add extra laundry detergent.
  • The next step is to give your fence a pre-washing with a hose to remove any loose dirt and grime.
  • After that, you should apply your vinegar solution to the fence using a gentle brush or a garden sprayer. As you work, be sure to rinse the solution from the fence. To avoid streaking while using this technique, you might want to start at the bottom and work your way up.

Way 3: Use A Mr. Clean Magic Eraser

You'll be surprised at how much good a Mr. Clean Magic Eraser can do for you with just a quick wipe-down. If you're working with simple dirt, dust, or general yard pollution, skip this step. If you have heavy-duty stains, though, it's a terrific step that can save you a lot of time. It's simple to clean a vinyl fence with a magic eraser:
  • After completely wetting it, wring away the extra moisture.
  • Starting at the top of your barrier, begin swiping.
  • If the eraser becomes excessively soiled, cut off the soiled portions and keep cleaning until the job is finished.

Way 4: Use A Simple Cleaning Solution

Compared to using a Mr. Clean Magic Eraser, this is an improvement. It will clean the majority of the same fundamental items that a magic eraser will, but it will be more effective at getting into nooks and crannies. For this approach:
  • A pail of warm water and some dish soap should be combined.
  • The water should be stirred up until it is foamy.
  • Scrub away after dipping an old dish towel or washcloth into water.
  • Try using a non-abrasive scrubber if there are any lingering, difficult-to-remove stains.

Way 5: Using A Bleach

Try using a bleach solution if the techniques stated above don't seem to be working. While some people might be hesitant to use bleach on vinyl because chlorine has the potential to start degrading vinyl if you're not careful, as long as you remember to properly dilute the bleach in your solution, you shouldn't experience any problems. Having said that, if your vinyl fence isn't white, you might want to completely avoid using bleach because you run the danger of bleaching the colors.
Prepare your cleaning solution according to the method above, but instead of using dish soap, try adding one part bleach for every five parts water. As you scrub at your vinyl fence, be sure to wear rubber gloves to protect your hands. If you want to minimize your contact with the bleach solution, you can think about utilizing a pump sprayer. Almost everything should be handled using this technique.

Way 6: Use A Specialized Cleaner

Iron and mold stains are the most difficult to remove. Try using a specialised vinyl fence cleaner for red iron stains. We don't have a specific one we suggest, but there are a lot of good ones available online or at home improvement stores. Try using a xylene cleanser for any further difficult-to-remove stains. It would be difficult to discover a more effective remedy.

Way 7: Use A Pressure Washer

Since they have more strength to remove difficult dirt and grime than you can with only your garden hose and thumb, pressure washers are frequently recommended as one of the best tools for cleaning fences. But not every pressure washer is made equally. In addition to the various pressure washer models (gas or electric), you also need to consider a number of other characteristics, such as:
  • PSI (pounds per square inch)
  • GPM (gallons per minute)
  • Types of pressure washer nozzles
  • Types of cleaning solutions

Although there is a lot to learn about pressure washers, you should normally use one with 2,000 to 2,800 PSI because that gives you the force you need to clean your vinyl fence.

Way 8: Opt For A DIY Cleaner

If you decide to make your own cleaner, follow these instructions for a basic recipe and how to use it:
  • Combine 1-2 gallons of water with 1/2 cup white vinegar.
  • Use the solution to wet a rag and clean the fence.
  • Clean the fence with water.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved