How To Clean A Redwood Deck: Step By Step Process Of Cleaning A Redwood Deck


Step By Step Process Of Cleaning A Redwood Deck

Redwood is regarded as one of the most long-lasting materials when it comes to home decks as well as patios. It lasts for so many years, is also fairly and extremely maintenance-free and a simple hosing will generally get rid of the majority of the dirt and debris. If you are looking to maintain the natural redwood color on your deck, then the best option is to use an oil-based stain that will help you achieve this. Preparing the deck for staining will put it in perfect & suitable condition that will make the stain more effective. Redwood is an attractive & charming, long-lasting choice for a deck that keeps the moisture at bay, feels soft underneath your feet, and can even help to drive away pesky insects. With all redwood can do for you, pay back the favor and help the wood in maintaining its rich, deep red tones. It is extremely important to regularly upkeep the redwood, which in turn will enhance your outdoor decor as well as comfort for many more years to come. In order to clean a redwood deck & retain the red color of the deck, go through the below-mentioned steps carefully & achieve the desired result of your work:
  1. Inspect The Deck: First of all, examine all the areas of the deck. The attractiveness & grace of a redwood plank might be reduced by declining the adjacent planks. Replace any planks, needed to be done essentially, in order to make sure that the appearance of your deck remains stellar.
  2. Sink Nails & Screws: The next step is to sink all the nails as well as the screws. A nail or screw that easily persists to penetrate through the wood is an indication of rot and that plank needs to be replaced.
  3. Remove Dirt & Grease: After that, get rid of the dirt as well as a grease with the help of a power washer. Choose a fan-type nozzle rather than the orbital option in order to avoid the pressure from damaging the wood. The wood fibers soak up the water, forcing it to expand up a little, which in turn makes some wood fibers raised.
  4. Sanding: Now, unfold the wood pores by sanding down the surface with the help of your orbital sander. For the main deck, use 60- to 80-grit sandpaper and then go a little higher, up to 100-grit sandpaper for some areas, including the handrail. The wood is now ready to receive any treatments and ensure that you are not pulling any splinters out of your foot later.
  5. Apply Sealant: Finally, it is time to put or spread a water-repellent sealant to the redwood having a UV-inhibitor. With the help of a bristle brush, try to prevent lap marks. Transparent stains can be very useful when it comes to newer wood, however, if in case the deck has aged, then it is better to replace some planks with new ones, use a semitransparent stain. It looks good and puts together the new and old boards nicely.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved