5 Easy Steps To Check Floor Level With Laser
Before installing the flooring to the floor, it is very important that the floor should be well leveled. The higher spots on the floor are easy to fix as compared to the lower dips. There are a number of ways to fix the level of the floor like "Laser Level" it can easily help to identify the lower or higher spots. The step to use the laser level are given below:
- Benchmark: The first step to level the floor with the Laser, is to set up a high spot benchmark, that the user wants throughout the floor.
- Laser Lines: The one laser line means that the floor is in the same elevation as the benchmark, but in case of the 2 lines then the floor has lower or higher spots.
- 360 Degree Circle: In case of the lower or higher spots, simply rotate the few degrees and mark out the lower or higher spots continue rotating until there is a 360 Degree Circle. In this situation, the rotary laser is very useful, especially the one with has a remote so that user can do it without having to walk back and forth.
- Filler: Once the high and low spots are found then it is very important to fill the area with the best quality strong filler that will not break with the span of time.
- Laser Level: Once all the lower or higher spots are fixed, then its time to use the laser level again for the final surface.