Easy Steps And Items Required To Build A Waterproof Box Out Of Wood
The waterproof boxes usually offer the place so as to store up the things without making them wet from the pool spills or the weather as well. The users can easily purchase the waterproof boxes and they can easily build the waterproof box at home by gathering the below-mentioned materials and then following the below-described steps:
Items Required
- Concrete Boxes, Plywood & Measuring Tape
- Pencil Saw & Waterproof Glue
- Galvanized Nails, Hammer & Carpenter's Square
- Level, Screws, Hinges & Sealer
- Paint, Screwdriver & Corner Braces
Steps
- Plan The Size And Place: Start by planing the place where they want to place their boxes and their desired size of the boxes as well. Then place the concrete blocks at their planned places so as to place the base of the boxes and the edges below them.
- Trim The Pieces: Then the users need to trim down the wood as per their planned size and to do so they need to mark down their measurements over the sheet of the plywood by using the pencil and then trim it accordingly by using the saw.
- Assemble The Walls: Then the users need to affix the walls of the box together by applying the waterproof glue at the corners of the long sized pieces. Then affix the longer sized pieces with the short sized pieces and then press them together to keep them in place and to further strengthen them the users can also use the nails. Then they need to clean up the unneeded glue and the users need to be sure that the corners are at the exact level. The users can also use the carpenter's square and the level so as to check the level of the box sides.
- Affix The Base: Then the users need to affix the base of the box and to do so they need to take one remaining piece and then place it over the box top so as to examine its level. Then remove the piece from that point and apply the glue on all of its sides and corners and then place it at the base accordingly. The users can also use the nails so as to secure it and then they need to clean up the unneeded glues from the inner and the outer areas of the box and then allow the wood to get dried off completely.
- Use The Braces: The users need to turn down the box in a way that the base will be sitting on the floor. In order to offer the box with more stability then they need to use the right-angled braces and then affix it at each corner. Then they need to use the half-inch screws so as to secure them respectively.
- Affix The Lid: Then the users need to place the lid on the open-faced side of the box so as to ensure that it is square on all of its sides. Then they need to line up the hinges in a way that one flap lies over box back and the other will lie below the lid. Then they need to mark down the place for the screws over the lid and then screw down the hinges over the marked area on the surface of the lid by using the half-inch screws. Then the users need to place the lid over the box top and then secure the hinges at the box back accordingly.
- Use The Sealer: Once the users successfully crafted the box then they need to apply the layer of the waterproof sealer over the entire surface of the box so as to prevent it from getting damaged with the water.