Easy Steps To Build A Kitchen Island With Slide In Range
The users can easily build the kitchen island with a slide-in range by following the below-mentioned steps:
- Gather All The Tools And Materials: The users need to start by gathering all the tools and the materials that they require while performing this procedure like Measuring tape, cabinets, Screwdriver, Wood screws and plywood countertop as well.
- Step 1: Once the users have collected all their materials then they need to calculate the measurements of the pre-planned area where the users want to install their kitchen island. The slide-in ranges are usually 48 inches in width and 36 inches in height accordingly. The users need to choose the drawer cabinets that can be used in storing the kitchen utensils and the large cabinets that can be used in storing the kitchen gadgets. The users are also advised to leave near about 36 inches space from the wall cabinets and from the refrigerator as well.
- Step 2: Then users need to affix the cabinets to the other side if in case they are having the large spaced room. The users can also add the shelves to the sides and then they can make the countertop to affix at near about ten inches from the slide where the back of the cabinet meets up. The users also need to add an extra depth of the countertop so that it can be used as the seating purpose.
- Step 3: Then the users need to call up the professional electrician so as to determine the wiring outlets. Before installing the kitchen island the users are advised to prepare the floor by cleaning up all the dust and the debris particles. Once the floor is prepared the users then need to build up the case that consists of the back and the two sides respectively. Then they need to install the cabinets by adjusting them on the floor. The users are advised to avoid nailing down the screws until the cabinets are properly fitted in one place. Then they need to add spacers in between the slides and the cabinets as well.
- Step 4: Once the range and the cabinets are settled in one place then they need to start calculating the measurements for their kitchen island top. Pen down all the measurements of the island surface on paper and then trim the plywood as per the measurements. Then affix the top to the island by using the glue so as to stop the top from the sliding respectively.