How To Attach Dishwasher To Granite Countertop: Easy Steps Of Attaching Dishwasher To Granite Countertop

Easy Steps Of Attaching Dishwasher To Granite Countertop

The dishwasher is usually installed by using the brackets and the screws on the regular countertops. The countertops that are made from the marble, stone, or from the granite material cannot be taped or simply drilled with the screws but they can be affixed by using the adhesive material. Usually, the installers use a very basic trick that they install the dishwasher beneath the countertops made up of stone. It is very efficient and it can be done by any person so as to fasten the dishwasher without having any worse effects over the granite countertops. The users can attach the dishwasher to the granite countertops at home by following the below-defined steps:

Step 1: Faceplate And The Brackets

The users need to begin by finding out the affixing brackets on their dishwasher. Usually, there are 2 clips made up of metal material on each one of the sides within the frontmost side. These clips will be probable of getting tilted to the ninety-degree angle but they can be tilted upwards. The users will also find out the hole within each screw end and it might be a bit difficult for them to reach the brackets from the frontmost side once the dishwasher has been installed. The users are advised to detach the topmost faceplate within the surface of the dishwasher or the minute sized metal filler that is also placed at the dishwasher top. This is also installed over the small-sized clips made up of metal material that can be detached easily. If in case the users find out that the faceplate or the filler will not come easily when they pry it off then they are advised to use the screwdriver to smoothly detach it within the brackets and then place it aside.

Step 2: Aligning And Feet

Eventually, the dishwasher consists of the 4 feet leveling and the users needs to begin by turning down the feet in the clockwise direction so as to depress the dishwasher up till the brackets that are placed on the dishwasher top will easily fit beneath the granite countertop without even touching up the countertop. It is somehow ok to incline them gently if they are rubbing a lot. In order to hook the dishwasher, the users are advised to gather the facts like how long their wires and hose are. Then they need to hook up all the items and then drift the dishwasher to its place beneath the granite countertop. They need to mark down the positions on the beneath area of the top side of the stone generally higher than the brackets.

Step 3: Plywood And The Adhesive Material

Then the users need to drift the dishwasher outwards to the few inches. If in case they are having the extra wire and pipe length then they need to lift the dishwasher as far as they can. Then they need to apply the silicone adhesive coat to one plywood side. Then they need to stick this to the beneath granite countertop side centered all over the marked area that they have made. If the users are having the room then they need to place the clamps over it. Then they need to pad the clamp jaw so that to avoid scratching down their granite countertop and if they are not having the room for the clamps then they need to use some heavy books so that they will add the pressure at the plywood block base. Then let the wood glue to get dried off completely for near about one complete night.

Step 4: Attach

Detach the wedges or the clamps within the topmost surface and then drift back the dishwasher to its place. Then the users need to examine the distance between the blocks of plywood and the clips. If in case the clips are having the distance of near about half-inch then bend it upwards so as to fit the flush adjacent to the block base. If in case they find out there is more distance then they need to lift the dishwasher outwards and then rotate the feet so as to raise the dishwasher so that the clips are having near about one by four inches distance. The users are advised to rotate the feet evenly so as to make the dishwasher lie in level. Once the users are satisfied with their desired height then they need to drift the dishwasher beneath the top and then align it perfectly as per their choice. Then bend down the clips if required so as to position the topmost clip side adjacent to the block underside. Then they need to insert the half-inch sized screw within the holes and then place them within the block of the plywood so as to fasten the dishwasher over the surface of the granite countertop. Then they need to replace the filler and the faceplate as well.