The corrugated metal is a utilitarian material that can be easily used in your home decorating. The modern or industrial look is created by using the wavy metal, which is commonly silver-colored. You can easily cover your cabinet front, simply make a headboard, or you can also put together your rolling door with the help of corrugated metal. You can decorate your bathroom, bedroom, feature wall, or hallway by using the corrugated metal for your wall border or a half-wall under the chair rail. Highlight your television wall or the interior of your bookcase or hutch. The corrugated metal comes in 42-inch-wide panels in 18, 20, 22, and the 24 gauge weights, and the precarious but longer widths in the lighter gauges.
7 Easy Steps Of Attaching Corrugated Metal To Cabinet Doors
If you want to attach the corrugated metal to your cabinets but confused about the procedure then don't worry we are here to help you. You just need to follow all the given easy steps to finish this task by yourself. Here are the 7 easy steps for this process:
- Step 1: First of all you need to measure your area where the corrugated metal needs to be placed. Here is an example, when you are going to remodel your kitchen cabinets or your wall then you first need to measure the length and width of your area and then write down this measurement on your notebook.
- Step 2: The next thing to do is to measure out the dimensions on your corrugated metal and then you have to mark your area to be cut.
- Step 3: Now you need to place your corrugated metal on a set of your sawhorses or you can also use a work table if the sawhorse is not easily available.
- Step 4: Next it's time to cut your corrugated metal with the help of electric shears or you can also use a saw.
- Step 5: Then you have to attach the J-channel with screws and then you need to drill to the top and bottom of your wall or the surface where the square or rectangular-shaped corrugated metal panel needs to be installed. If you are going to make a shaped border on the top of your corrugated metal piece then you need to use your J-channel for the bottom only.
- Step 6: After that, you need to slide the corrugated metal piece into your J-channel openings very carefully.
Step 7: Finally you just need to locate the center of your corrugated metal piece. Once done, then you need to insert the three equally spaced screws with the help of a drill machine in order to attach it directly to your wall and it is best to sink the screws into your wall studs. If you see that the screws are not enough then you can also add more screws according to your need.