Step By Step Instructions Of Applying Primer To The Cabinets
One of the simplest and affordable ways when it comes to giving your kitchen a fresh, new appearance is to repaint the cabinets. You can paint over old paint or stain until you prepare the cabinets properly. Applying primer before you paint will help you to make sure that the new paint has a smooth as well as a clean finish to adhere to. This, in turn, will help prevent the paint from chipping or peeling during the course of normal use. The majority of the paints come with self-primers, however, don’t leave this step except if you are sure that your paint has a primer built in. This is particularly important if you live in a damp, rainy or humid climate. If you are looking to apply primer to cabinets, then go through the below-mentioned steps carefully:
- Choose The Type Of Primer: First of all, you need to select the correct type of primer for the job. Two types of primers are available, oil-based & latex-based primers. Oil-based primers go on thicker and are considered better option to use when painting over old paint or stain, however, they dry slowly and need a natural-bristle brush as well as mineral spirits for cleanup. Latex-based primers don’t cover flaws quite as well, however, they dry quickly with less fumes as well as clean up with soap and water.
- Remove Cabinet Doors & Hardware: Now, pull out your cabinet doors and take off all hardware. Put them down on a flat surface covered with drop cloths in order to safeguard it from drips and spills.
- Clean Cabinet Doors: Next, you need to mix 1 tablespoon of degreasing cleanser with 1 quart of water & clean your cabinet doors rigorously with this mixture. Dishwashing soap works exceptionally well for this. Dry your cabinets from top to bottom with shop cloths.
- Sand Your Cabinets: Now, you need to sand your cabinets, in a smooth manner, with medium-grit sandpaper in order to get rid of chipped paint and small imperfections. After that, remove all the sanding dust.
- Apply The Primer: Finally, it is time to apply the primer with the help of a paintbrush, using long, even strokes. Feather the edges where strokes overlap in order to make sure that you have a flat, even finish. Allow the primer dry entirely in accordance with the instruction on the label before applying your first coat of paint.